Motorola Solutions Inc. 99FT7016 ユーザーズマニュアル

m

Congratulations on your new Motorola Bluetooth 
Accessory Pod! This Pod device is designed to allow 
you the convenience of Bluetooth technology by simply 
connecting it to a Motorola swivel earpiece, enabling you 
to comfortably wear it in many convenient ways for long 
periods of time. Furthermore, the Bluetooth Pod is 
exclusively designed for business radio applications and 
optimized to work with Motorola two-way radios. 
This user guide contains the operation and pairing 
instructions of Bluetooth Pod. Before getting started, 
please make sure you read and understand the RF and 
Acoustic Safety sections, which contain very important 
information about this product.

The radio is restricted to occupational use only to satisfy 
ICNIRP/FCC RF energy exposure requirements. Before 
using this product, read the RF energy awareness 
information and operating instructions in the RF Energy 
Exposure and Product Safety Guide booklet enclosed 
with your radio (Motorola Publication part number 
6881095C98 (US) or 6864117B25 (EMEA)) to ensure 

compliance with RF energy exposure limits.
This device complies with part 15 of the FCC Rules and 
Industry Canada license-exempt RSS standard (s). 
Operation is subject to the following two conditions: (1) 
This device may not cause harmful interference, and (2) 
this device must accept any interference received, 
including interference that may cause undesired 
operation. Any changes or modifications not 
expressly approved by Motorola may void the user’s 
authority to operate this device. 

Battery is shipped with a nominal charge between 30% 
and 50%. Battery should be stored between -10 °C 
(14 °F) and 30 °C (86 °F) to minimize permanent 
capacity loss.
Caution: Storing your fully charged accessory in 

high-temperature conditions may permanently 
reduce the life of the internal battery.

Note: The battery is not a user replaceable part.

•

Do not charge your accessory in temperatures 
below 0 °C (32 °F) or above 45 °C (113 °F). Do not 
store your accessory in direct sunlight or where 
expected temperatures can exceed this range such 
as inside a parked car. 

•

Storing your fully charged accessory in 
high-temperature conditions may permanently 
reduce the life of the internal battery. 

•

Battery life may temporarily shorten in 
low-temperature conditions.

Exposure to loud noises from any source for extended 
periods of time may temporarily or permanently affect 
your hearing. The louder the radio's volume, the less 
time is required before your hearing could be affected. 
Hearing damage from loud noise is sometimes 
undetectable at first and can have a cumulative effect.

To protect your hearing:
•

Use the lowest volume necessary to do your job.

•

Turn up the volume only if you are in noisy 
surroundings.

•

Turn down the volume before adding headset or 
earpiece.

•

Limit the amount of time you use headsets or 
earpieces at high volume.

Before you start, make sure the pod is fully charged. 
Recommended charging time is three (3) hours.
For detailed instructions on pod charging, please 
refer to the Charging Cradle Instructions Leaflet 
(P/N: 68012008029).

This Bluetooth Accessory Pod is designed to be used in 
conjunction with the Motorola Earpiece PMLN6397/
HKLN4513 as shown in the figure below:

Before using this product, read the 
operating instructions for safe usage 
contained in the RF Energy Exposure and 
Product Safety Guide enclosed with your 
radio.

In order to connect the Swivel Earpiece, insert the 
earpiece audio connector into the pod audio jack 
connector, making sure it is firmly attached.

Note: Power ON the pod only after the earpiece is 

inserted.

Pairing your pod for the first time
1.

Before starting, make sure your two-way radio is in 
pairing mode.

2.

With the pod off, press and hold the pod power 
button until the LED is solid Blue.

3.

Position the pod next to the two-way radio that you 
want to pair.

4.

Pod will provide voice prompt to indicate successful 
connection.

5.

Refer to the table below for additional LED status 
indications.

Clearing/Erasing Pairing Information
1.

Ensure the previous connected two-way radio is 
turned off.

2.

Turn off the pod.

3.

Long press the power button until you hear a voice 
prompt “Pairing Cleared”.

4.

LED will show solid Blue, indicating the pod is in 
pairing mode.

For more information about this product, please contact 
your Motorola Authorized Dealer or visit us at:
http://www.motorola.com/Business/US-EN/
Business+Product+and+Services/Accessories/Two-
Way+Radio+Accessories/
Wireless+Bluetooth+Accessories

The pod can be charged with Motorola Bluetooth Pod 
Charging Cradle (PMLN6428/HKLN4509).
Note: For assuring proper operation, DO NOT power on 

the pod while charging. 

Swivel Earpiece

Bluetooth Pod

1

2

3

4

6

5

1

3.5 mm Audio Jack

2

Bluetooth Status Indicator

3

Power Button

4

Clip

5

Recess for Label

6

Charger Contact

Power

Power ON (LED ON) 
(press and hold for 1 
second)

Solid Green LED for 3 
seconds then OFF

Power OFF (Press 
and hold for 3 
seconds)

Flashing Red LED 3 times 
then OFF

BT Status

Pairing Mode

Solid Blue LED

BT Connecting

Flashing Green LED

Pairing Fail/Timeout

Flashing Purple LED for 2 
seconds

Wireless Link 
Connected With Host

Flashing Blue LED every 5 
seconds

Wireless Link 
Disconnected From 
Host

Fast Flashing Blue LED

Battery

Low

Flashing Red LED every 2 
minutes

Charging

Charging

Solid Red LED

Fully Charged

Solid Green LED

MOTOROLA, MOTO, MOTOROLA SOLUTIONS and the Stylized M 

logo are trademarks or registered trademarks of Motorola Trademark 

Holdings, LLC and are used under license. All other trademarks are the 

property of their respective owners. 

© 2012 Motorola Solutions, Inc. 

All rights reserved.

*68012007081*

68012007081-A

68012007081_a.book  Page 1  Friday, November 30, 2012  9:05 AM