Clarity A Division of Plantronics Inc. C4210B ユーザーズマニュアル

12

CAUTION: Disconnect the telephone line cord 
before connecting or disconnecting the battery 
backup in the wall mount bracket.

1.  Plug one end of the supplied modular tele- 

 

 

phone line cord into the jack marked TEL  

 

located on the back of the telephone base  

 

as shown in the diagram.

2.  Plug the modular telephone line cord’s other  
 

end into a modular phone jack.

3.  Insert the supplied AC Adapter’s plug into the  
 

jack marked 9V DC 400mA located on the  

 

back of the telephone base.

4.  Plug the adapter into a standard 120V AC  
 

power (electrical) outlet. 

5.  Align the mounting bracket on the back of  

 

 

the base so that the black rubber feet are  

 

towards the bottom of the phone. Insert the  

 

bracket’s tabs into the slots and secure the  

 

bracket by sliding it upward.

6.  Lift the base’s antenna to a vertical position.
7.  Set the TONE/PULSE switch located on the  
 

back of the base to correct dialing mode.  

 

Please check with your local Phone Company  

 

if uncertain of the type of service. 

8.  Place handset in the cradle to begin  
 

initial charging.

CAUTION: Disconnect the telephone line cord 
before connecting or disconnecting the battery 
backup in the wall mount bracket.

The base unit may be mounted on a standard  
wall plate.