Clarity A Division of Plantronics Inc. TL100 ユーザーズマニュアル
5
STEP 2 Plug one of the supplied power adapters into a power outlet, then plug
the loose end of the power cable in the back of the transmitter. The light atop
the transmitter will blink red three times to indicate that it has power, then starts
blinking blue (searching for the headset).
the loose end of the power cable in the back of the transmitter. The light atop
the transmitter will blink red three times to indicate that it has power, then starts
blinking blue (searching for the headset).
STEP 3 Please make sure the headset is within range of the transmitter (up to
30ft). Turn on the headset by moving the small round switch on the right side of
the headset into center position. The headset and transmitter are pre-paired and
will connect automatically within 15 seconds. The transmitter light will turn solid
blue when the headset is connected.
30ft). Turn on the headset by moving the small round switch on the right side of
the headset into center position. The headset and transmitter are pre-paired and
will connect automatically within 15 seconds. The transmitter light will turn solid
blue when the headset is connected.
WHAT THE TRANSMITTER LIGHT MEANS:
Blinks red and turns off –transmitter off
Steady blue – headset connected
Blinking blue – searching for headset or headset out of range
Steady purple – headset off
Steady blue – headset connected
Blinking blue – searching for headset or headset out of range
Steady purple – headset off
HEADSET ADJUSTMENTS:
Toggle the Volume +/- wheel forward or backward to control the volume.
Tap the red Mute button to hear your natural surroundings. Tap the button again to
return to listening to your TV.
Adjust the headset to fit your head comfortably by pulling downward gently on
each side, until the earphone cushions fit comfortably over each ear.
Tap the red Mute button to hear your natural surroundings. Tap the button again to
return to listening to your TV.
Adjust the headset to fit your head comfortably by pulling downward gently on
each side, until the earphone cushions fit comfortably over each ear.