Panasonic Corporation of North America PT-VW355N ユーザーズマニュアル
Note
f
It is compatible with the USB memory sold in the market.
f
It cannot be used the other format other than the formatted with FAT16 and FAT32.
Inserting the USB memory
1) Insert the USB memory directly into the <USB A (VIEWER)> terminal.
Attention
f
When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.
Removing the USB memory
1) Make sure that the USB memory is not flashing, and then unplug it.
Attention
f
Please note following points when removing the USB memory.
- The indicator of the USB memory is blinking means that the projector is reading out the data. Do not remove the USB
memory while it is blinking.
- When using a USB memory without an indicator, you cannot recognize when the projector reading out the data. Please
remove it from the projector after closing the memory viewer function or turning off the projector.
- Do not insert and remove the USB memory in a short time. Remove the USB memory at least five seconds after inserting.
And insert it at least five seconds after removing. When inserting or removing the USB memory, the projector takes about
5 seconds to identify the operation.
Note
f
The USB memory can be inserted or removed regardless of the power status of the projector.
Displaying the memory viewer screen
1) Insert the USB memory in which the video or still image file is stored into the <USB A (VIEWIER)>
terminal.
f
For more information about using USB memory, refer to “Cautions on using USB Memory”. (x page 116)
2) Press the <MEMORY VIEWER> button.
f
The memory viewer screen (in thumbnail or list display) will be projected.
f
A cursor will be displayed in the thumbnail display area or the list display area on the right of the screen. (The
background is yellow.)
Thumbnail display
Folder list display
Note
f
The display method of the Memory Viewer screen (in thumbnail or list display) can be set in [NETWORK/USB] menu →
[MEMORY VIEWER] → [VIEW]. (x page 94)
Operations of the Memory Viewer screen
The following describes the operations after the Memory Viewer screen displays.
When displaying in thumbnail
1) Press the <AUTO SETUP/CANCEL> button on the remote control or the <EASY SETTING/CANCEL>
button on the control panel.
ENGLISH - 117
Chapter 5 Operation of Function - Memory Viewer function