Panasonic Corporation of North America 9TGCF-29AA ユーザーズマニュアル

Wireless LAN

below is only an example. For the other settings, ask your system administrator 
or the person in charge of the network.)

A

Select [64-bit] or [128-bit] from [Encryption Level].

B

Select [Use pass phrase] or [Use hex key], and input the pass phrase or key.
In the case of ASCII character: [64-bit (5 characters)] [128-bit (13 characters)] . 
In the case of hexadecimal: [64-bit (10 digits)] [128-bit (26 digits)].

• Set the same values for the computer side and the access point side.
• When using an access point for which "128-bit" can be set (some access 

points display "104-bit"), we recommend setting data encryption to "128-
bit" to prevent unauthorized decryption.

Select the profile you have set and select [Connect].

If the setting of the profile that is currently connected is changed, the new setting 
will not be enabled until you select the profile and then select [Connect].

Select [OK].

Open the Intel PROSet using either of the following procedures.

Select [start] - [All Programs] - [Intel Network Adapters] - [Intel(R) PROSet for Wireless].

Double-click 

 or 

 on the taskbar to check the communication status.

For more information about how to use the Intel PROSet, refer to [Help] in the menu bar.

If the function fails to operate correctly

Read the operating instructions for the access point carefully and check the settings.

The access point fails to be displayed in [Available Networks]

Select [Networks], then select the profile you are using, and select [Advanced]. [Connect 
to ad hoc networks only] may have been selected in [Connection preference].   In this 
case, select [Connect to infrastructure and ad hoc networks].

This computer uses channels 1 through 11

.  Check the channel being used by the 

access point.