Panasonic Corporation of North America 9TGWLM-1 ユーザーズマニュアル
18
Getting Started
3
Select [AdHoc].
The following screen is displayed.
The following screen is displayed.
<Wireless display screen>
Change setting on host PC to the following
value, reboot the host PC, then select
"Connect" below.
value, reboot the host PC, then select
"Connect" below.
Wireless LAN card
Network Type : AdHoc
SSID : cfvdw07-43411
Encryption : disable
TCP/IP
IP Address : 10.57.148.205
NetMask : 255.0.0.0
MeiWDS
Password : wdsp
Connect Cancel
First-time Operation
CAUTION
Do not select [Connect] until step 9 is completed.
This screen is a sample.
11
Setup the wireless display
1
Set the battery pack in the wireless display.
2
Connect the wireless display to a power outlet and
turn the wireless display on.
The following screen is displayed.
turn the wireless display on.
The following screen is displayed.
<Wireless display screen>
Select network type.
AdHoc
Infrastructure
Cancel
To the computer
(
(
Page 14)
Be sure to insert the battery pack as illustrated.
CAUTION
Tab
connector