Arris IP810W ユーザーズマニュアル

•

Read these instructions.

•

Keep these instructions.

•

Heed all warnings.

•

Follow all instructions.

•

Do not use this apparatus near water.

•

Clean only with dry cloth.

•

Do not block any ventilation openings. Install in accordance with the

manufacturer’s instructions.

•

Do not install near any heat sources such as radiators, heat registers, stoves, or

other apparatus (including amplifiers) that produce heat.

•

Do not defeat the safety purpose of the polarized or grounding type plug. A

polarized plug has two blades with one wider than the other. A grounding type

plug has two blades and a third grounding prong. The wide blade or the third

prong is provided for your safety. If the provided plug does not fit into your outlet,

consult an electrician for replacement of the obsolete outlet.

•

Protect the power cord from being walked on or pinched particularly at plugs,

convenience receptacles, and the point where they exit from the apparatus.

•

Only use attachments/accessories specified by the manufacturer.

•

Unplug this apparatus during lightning storms or when unused for long periods of

time.

•

Refer all servicing to qualified service personnel. Servicing is required when the

apparatus has been damaged in any way, such as the power supply cord or plug

is damaged, liquid has been spilled or objects have fallen into the apparatus, the

apparatus has been exposed to rain or moisture, does not operate normally, or

has been dropped.

•

The mains plug is the main disconnect device. It shall remain readily accessible

and operable.

•

The apparatus shall not be exposed to dripping or splashing and no objects filled

with liquids, such as vases, shall be placed on the apparatus.

WARNING: To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire

or the like.

•

See label on bottom of unit for additional markings.

•

Transport the cable terminal in its shipping box or an equally padded container.

•

Do not expose the terminal to rain or moisture.

•

Do not place the terminal in an enclosed area where the cooling vents are blocked

or impede the flow of air through the ventilation openings.

•

Install the terminal so that its position does not interfere with its proper

ventilation. For example, do not place the terminal on a bed, sofa, rug, or similar

surface that could block the ventilation openings.

•

Install the terminal so that there is a minimum of two inches of space between

surrounding surfaces and the top, left, and right sides of the terminal to ensure

proper ventilation.

•

Install the terminal away from heat sources such as radiators, heat registers

and stoves. Installation of the terminal near consumer electronics devices, such

as stereo receiver/amplifiers and televisions, is permitted as long as the air

surrounding the terminal does not exceed 40º C (104º F).

•

Place the terminal on a flat surface not prone to vibration or impact.

•

Do not place the terminal on top of another electronic device.

•

Do not install the terminal in an area where condensation occurs.

•

To prevent the temporary loss of guide data and cause a temporarily non-

responding terminal, do not plug the AC power cord into a switched power outlet.

•

To avoid shock and vibration damage to the internal hard drive, do not move the

terminal while it is plugged in.

•

To allow the hard drive to spin down and park its heads, wait at least 10 seconds

after disconnecting power before moving the terminal.

•

Install the terminal so that there is a minimum of 3 inches of space between

surrounding surfaces and the back of the terminal to ensure proper ventilation.

This product contains a radio transmitter and accordingly has been certified as

compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators. Products that

contain a radio transmitter are labeled with FCC ID and the FCC logo.

CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC RF exposure

compliance requirements, the separation distance between the antenna and any

person’s body (including hands, wrists, feet and ankles) must be at least 20 cm (8

inches).

This device complies with part 15 of the FCC Rules. Operation is subject to the following

two conditions: (1) This device may not cause harmful interference, and (2) this device

must accept any interference received, including interference that may cause undesired

operation.

Note: This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and set-top.

•

Connect the equipment into an outlet on a circuit different from that to which the

set-top is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by ARRIS for compliance

could void the user’s authority to operate the equipment.
FCC DECLARATION OF CONFORMITY

ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024,

1-866-36-ARRIS,

declares that this Class B digital device complies with 47 CFR Parts 2 and 15 of the FCC

rules.
INDUSTRY CANADA (IC)

This Class B digital device complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT

The exclamation point, within an equilateral triangle, is intended to

alert the user to the presence of important installation, servicing, and

operating instructions in the documents accompanying the equipment.

This symbol indicates that dangerous voltage levels are present within

the equipment. These voltages are not insulated and may be of sufficient

strength to cause serious bodily injury when touched. The symbol may

also appear on schematics.

When you see this symbol on an ARRIS product, do not dispose of the

product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or commercial

waste. Some countries or regions, such as the European Union, have set

up systems to collect and recycle electrical and electronic waste items.

Contact your local authorities for information about practices established

for your region. If collection systems are not available, call ARRIS

Customer Service for assistance.

This device is a wireless network product that uses Direct Sequence Spread Spectrum

(DSSS) and Orthogonal Frequency-Division Multiple Access (OFDMA) radio technologies.

The device is designed to be interoperable with any other wireless DSSS and OFDMA

products that comply with:

•

The IEEE 802.11 Standard on Wireless LANs (Revision B, Revision G, Revision N,

and Revision AC), as defined and approved by the Institute of Electrical Electronics

Engineers

•

The Wireless Fidelity (Wi-Fi) certification as defined by the Wireless Ethernet

Compatibility Alliance (WECA).

In some situations or environments, the use of wireless devices may be restricted by

the proprietor of the building or responsible representatives of the organization. For

example, using wireless equipment in any environment where the risk of interference to

other devices or services is perceived or identified as harmful.

If you are uncertain of the applicable policy for the use of wireless equipment in a

specific organization or environment, you are encouraged to ask for authorization to

use the device prior to turning on the equipment.

The manufacturer is not responsible for any radio or television interference caused by

unauthorized modification of the devices included with this product, or the substitution

or attachment of connecting cables and equipment other than specified by the

manufacturer. Correction of the interference caused by such unauthorized modification,

substitution, or attachment is the responsibility of the user.

The manufacturer and its authorized resellers or distributors are not liable for any

damage or violation of government regulations that may arise from failing to comply

with these guidelines.

Note: The use of the 5150-5250 MHz frequency band is restricted to Indoor Use Only.

SECURITY WARNING: This device allows you to create a wireless network. Wireless

network connections may be accessible by unauthorized users. For more information

on how to protect your network, see the set-top User Guide for instructions or visit the

ARRIS website, www.arrisi.com.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION

ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024

IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY BEFORE

YOU USE ANY SOFTWARE, FIRMWARE AND RELATED DOCUMENTATION (“SOFTWARE”)

PROVIDED WITH THE ARRIS DIGITAL CABLE RECEIVER OR HOME THEATER SYSTEM (EACH

SHALL BE REFERRED TO IN THIS LICENSE AS A “RECEIVER”). BY USING THE RECEIVER

AND/OR USING ANY OF THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH

OF THE TERMS OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY

BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS LICENSE APPLY

TO YOU AND TO ANY SUBSEQUENT USER OF THIS SOFTWARE.