Arris XG1V4 ユーザーズマニュアル
1
IMPORTANT SAFETY INSTRUCTIONS
•
Read these instructions.
•
Keep these instructions.
•
Heed all warnings.
•
Follow all instructions.
•
Do not use this apparatus near water.
•
Clean only with dry cloth.
•
Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
•
Do not install near any heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
•
Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
type plug has two blades and a third grounding prong. The wide blade or
the third prong is provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement of the obsolete
outlet.
•
Protect the power cord from being walked on or pinched particularly at
plugs, convenience receptacles, and the point where they exit from the
apparatus.
apparatus.
•
Only use attachments/accessories specified by the manufacturer.
•
Unplug this apparatus during lightning storms or when unused for long
periods of time.
•
Refer all servicing to qualified service personnel. Servicing is required when
the apparatus has been damaged in any way, such as the power supply cord
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT SAFETY CONSIDERATIONS FOR ALL SET-TOPS
•
The mains plug is the main disconnect device. It shall remain readily
accessible and operable.
•
The apparatus shall not be exposed to dripping or splashing and no objects
filled with liquids, such as vases, shall be placed on the apparatus.
•
WARNING: To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
•
WARNING: Batteries shall not be exposed to excessive heat such as
sunshine, fire or the like.
•
See label on bottom of unit for additional markings.
During Transportation to the Subscriber Home
•
Transport the cable terminal in its shipping box or an equally padded
container.
•
Do not expose the terminal to rain or moisture.
During Installation
•
Do not place the terminal in an enclosed area where the cooling vents are
blocked or impede the flow of air through the ventilation openings.
•
Install the terminal so that its position does not interfere with its proper
ventilation. For example, do not place the terminal on a bed, sofa, rug, or
similar surface that could block the ventilation openings.
similar surface that could block the ventilation openings.
•
Install the terminal so that there is a minimum of two inches of space
between surrounding surfaces and the top, left, and right sides of the
terminal to ensure proper ventilation.
terminal to ensure proper ventilation.
•
Install the terminal away from heat sources such as radiators, heat registers
and stoves. Installation of the terminal near consumer electronics devices,
such as stereo receiver/amplifiers and televisions, is permitted as long as
the air surrounding the terminal does not exceed 40º C (104º F).
such as stereo receiver/amplifiers and televisions, is permitted as long as
the air surrounding the terminal does not exceed 40º C (104º F).
•
Place the terminal on a flat surface not prone to vibration or impact.
•
Do not place the terminal on top of another electronic device.
•
Do not install the terminal in an area where condensation occurs.
•
To prevent the temporary loss of guide data and cause a temporarily non-
responding terminal, do not plug the AC power cord into a switched power
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
outlet.
ADDITIONAL SAFETY CONSIDERATIONS FOR DVR MODELS
•
To avoid shock and vibration damage to the internal hard drive, do not
move the terminal while it is plugged in.
•
To allow the hard drive to spin down and park its heads, wait at least 10
seconds after disconnecting power before moving the terminal.
•
Install the terminal so that there is a minimum of 3 inches of space between
surrounding surfaces and the back of the terminal to ensure proper
ventilation.
ventilation.
FCC Certification
This product contains a radio transmitter and accordingly has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC
RF exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles)
must be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC DECLARATION OF CONFORMITY
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024,
This product contains a radio transmitter and accordingly has been certified
as compliant with 47 CFR Part 15 of the FCC Rules for intentional radiators.
Products that contain a radio transmitter are labeled with FCC ID and the FCC
logo.
CAUTION: Exposure to Radio Frequency Radiation. To comply with the FCC
RF exposure compliance requirements, the separation distance between the
antenna and any person’s body (including hands, wrists, feet and ankles)
must be at least 20 cm (8 inches).
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC DECLARATION OF CONFORMITY
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024,
1-866-36-
ARRIS, declares that this Class B digital device complies with 47 CFR Parts 2
and 15 of the FCC rules.
and 15 of the FCC rules.
INDUSTRY CANADA (IC)
This Class B digital device complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
RADIATION EXPOSURE STATEMENT
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé
et actionné avec une distance minimum de 20 centimètres entre le radiateur
et votre corps.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
This Class B digital device complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
RADIATION EXPOSURE STATEMENT
The device meets the exemption from the routine evaluation limits in section
2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain
Canadian information on RF exposure and compliance.
Le dispositif rencontre l'exemption des limites courantes d'évaluation dans la
section 2.5 de RSS 102 et la conformité à l'exposition de RSS-102 rf,
utilisateurs peut obtenir l'information canadienne sur l'exposition et la
conformité de rf.
This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter. This equipment should be installed and
operated with a minimum distance of 20 centimeters between the radiator
and your body.
Cet émetteur ne doit pas être Co-placé ou ne fonctionnant en même temps
qu'aucune autre antenne ou émetteur. Cet équipement devrait être installé
et actionné avec une distance minimum de 20 centimètres entre le radiateur
et votre corps.
SPECIAL SYMBOLS THAT MIGHT APPEAR ON THE EQUIPMENT
The exclamation point, within an equilateral triangle, is intended to
alert the user to the presence of important installation, servicing, and
operating instructions in the documents accompanying the
equipment.
operating instructions in the documents accompanying the
equipment.
This symbol indicates that dangerous voltage levels are present
within the equipment. These voltages are not insulated and may be of
sufficient strength to cause serious bodily injury when touched. The
symbol may also appear on schematics.
sufficient strength to cause serious bodily injury when touched. The
symbol may also appear on schematics.
CARING FOR THE ENVIRONMENT BY RECYCLING
When you see this symbol on an ARRIS product, do not dispose of
the product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for information
about practices established for your region. If collection systems are
not available, call ARRIS Customer Service for assistance.
the product with residential or commercial waste.
Recycling your ARRIS Equipment
Please do not dispose of this product with your residential or
commercial waste. Some countries or regions, such as the European
Union, have set up systems to collect and recycle electrical and
electronic waste items. Contact your local authorities for information
about practices established for your region. If collection systems are
not available, call ARRIS Customer Service for assistance.
SOFTWARE LICENSE, SAFETY, AND REGULATORY INFORMATION
ARRIS Enterprises, Inc., 3871 Lakefield Drive, Suwanee, GA 30024
IMPORTANT: PLEASE READ THIS SOFTWARE LICENSE (“LICENSE”) CAREFULLY
BEFORE YOU USE ANY SOFTWARE, FIRMWARE AND RELATED
DOCUMENTATION (“SOFTWARE”) PROVIDED WITH THE ARRIS DIGITAL CABLE
RECEIVER OR HOME THEATER SYSTEM (EACH SHALL BE REFERRED TO IN THIS
LICENSE AS A “RECEIVER”). BY USING THE RECEIVER AND/OR USING ANY OF
THE SOFTWARE, YOU INDICATE YOUR ACCEPTANCE OF EACH OF THE TERMS
OF THIS LICENSE. UPON ACCEPTANCE, THIS LICENSE WILL BE A LEGALLY
BINDING AGREEMENT BETWEEN YOU AND ARRIS. THE TERMS OF THIS