Furuno USA Inc 9ZWFS2570 ユーザーズマニュアル

10  NBDP FILE OPERATIONS 
 

  When two working areas have been opened, the close confirmation window 

appears. See paragraph 10.3.2 below. In this case, choose Yes or No and press 
the [Enter] key to close an open file in order to open another file. 

3. Type your message. 
 
Note:

  Do not use lower case letters, or the symbols #, &, *, $ and % in telex messages. 

Also, do not put “$$$” in the middle of a TX message, but at the end. The 
communication line is automatically disconnected when this string is detected. 

 
 

Use only 2HD type floppy disks. 
Insert floppy disk with care. Rough 
handling can destroy the 
information stored inside. To eject a 
disk, press the eject button on the 
right side of the floppy disk drive 
and then remove the disk. Do not eject a disk while the operating lamp is lit; the contents of 
the disk may become damaged. 
 

Before you can save a file to a floppy disk, the disk must be formatted. Formatting prepares 
the disk for use in the system.   
 
 
1.  Press function key [F1]. 
2.  Press the [0] key to choose Floppy Disk Format. 
3.  Press the [↑] key to choose Yes. 
4.  Press the [Enter] key. 
5.  Insert a new floppy disk in the disk drive and press the [Enter] key. After the formatting 

has been completed you are asked “Format another (Y/N)?” Press [N] and [Enter] to 
quit. 

 

1.  Press the function key [F1] to display 

the File menu. 

2.  Press the [3] key. The screen should 

look something like the illustration at right. 

3.  Yes is selected; press the [Enter] key. Enter file name, using up to eight characters. 

You may use any alphabet or numeric on the keyboard. But you may not use the symbols 
shown below. You may add an extension at the end of the file name, for example, .TXT, to 
distinguish text files from macro files. 

|     :  "  >  <   ;

!

 

4.  Press the [Enter] key. 

Hole opened: Write protect

Write-protect Tab

Write-Protect Tab

Save file ?

( UNTITLED1   )

Close Text

No