Furuno USA Inc 9ZWRTR057A ユーザーズマニュアル
5-1
5.
GPS OPERATION
If the FURUNO GPS Navigator GP-320B is connected to this radar, you can set GP-
320B from this radar.
320B from this radar.
5.1
Navigator Mode
1.
Press the
MENU key to open the menu.
2.
Use the Cursorpad (
S or T) to select [GPS] and press the ENTER key.
3.
Use the Cursorpad (
S or T) to select [Mode] and press the ENTER key.
Mode options
4.
Use the Cursorpad (
S or T) to select [GPS] or [WAAS] then press the ENTER
key.
5.
Press the
MENU key to close the menu.
5.2
Datum
Select the type of datum which matches the paper charts you use for navigation. Se-
lect [WGS-84] if the radar is connected to an AIS Transponder.
lect [WGS-84] if the radar is connected to an AIS Transponder.
1.
Press the
MENU key to open the menu.
2.
Use the Cursorpad (
S or T) to select [GPS] and press the ENTER key.
3.
Use the Cursorpad (
S or T) to select [Datum] and press the ENTER key.
Datum options
4.
Use the Cursorpad (
S or T) to select the type of datum and press the ENTER
key. If you select [WGS-84] or [Tokyo], go to step 7. If you select [Other], go to the
next step.
next step.
5.
Use the Cursorpad (
S or T) to select [Datum No] and press the ENTER key.
Datum No setting window
6.
Use the Cursorpad (
S or T) to select the datum number and press the ENTER
key. (The setting range is 001 - 192 and 201 - 254. Refer to the appendix 2 “GEO-
DETIC CHART LIST”.)
DETIC CHART LIST”.)
7.
Press the
MENU key to close the menu.