ICOM 242700 ユーザーズマニュアル

68

4

RECEIVE AND TRANSMIT

DProgramming a DTMF code

qPush [MODE] to select FM mode.

wSelect S-1.

ePush [F-2 DTM] then [Z(

)] to select the

DTMF root menu.

• If the DTMF root menu appears, skip pushing

Z(

)]. The DTMF starting menu can be

changed in the miscellaneous (others) set mode. (see
p.136)

rPush [F-2 EDT] to enter the DTMF edit menu.

tPush [F-1 D1] — [F-4 D4] to select the desired

DTMF memory channel.

ySelect the desired code by rotating [DIAL].

• Push

[F-1 Å] or [F-2 Ç] for cursor movement.

• Push

[F-3 DEL] to delete the selected code.

uRepeat steps t and y until the desired contents

are input.

iPush [Z(

)] to return to memory channel

selection mode, then select the next memory chan-
nel and repeat steps 

t and u for code input, if de-

sired.

oPush [Z(

)] twice to exit the keyer edit

mode.

DTMF memory channel select

Selected
code

[MENU/GRP]

[F-1]

[F-2] [F-3] [F-4]

[DIAL]

• Push and hold 

[MENU/GRP] for 1 sec. once or twice

to select the menu group S.

• Push

[MENU/GRP] momentarily one or more times to

select the menu S-1.

The rate at which DTMF memories send individual
DTMF characters can be set to accommodate oper-
ating needs.

qSelect the DTMF root menu as described above.

wPush [F-4 SET] to enter the DTMF set mode.

eRotate [DIAL] to set the desired DTMF speed.

• Four rates are available: “100 ms” is the fastest; “500

ms” is slowest.

• Push

[F-4 DEF] for 1 sec. to select the default rate.

rPush [Z(

)] twice to exit the DTMF set

mode and return to the normal FM mode display.

DDTMF speed