ICOM 268500 ユーザーズマニュアル
2
PANEL DESCRIPTION
New2001
2
■ Panel description
q POWER/VOLUME CONTROL [VOL]
Turns power ON and OFF and adjusts the audio level. (p. 7)
w SQUELCH CONTROL [SQL]
Sets the squelch threshold level. (p. 7)
e DISTRESS SWITCH [DISTRESS]
Transmits distress call when pushed for 5 sec.
r CHANNEL 16/CALL CHANNEL SWITCH [16•
9
]
➥ Selects channel 16 when pushed. (p. 5)
➥ Selects call channel when pushed for 1 sec. (p. 5)
• “CALL” appears when call channel is selected.
➥ Push for 3 sec. to enter call channel programming con-
dition when call channel is selected. (p. 8)
➥ While pushing [CH/WX
•DUAL
], enters channel name
programming condition. (p. 8)
➥ Enters set mode when pushed while turning power ON.
(p. 12)
t DSC/POSITION SWITCH [DSC/ENT•
POS
]
➥ Selects the DSC menu when pushed.
➥ Shows current position and time from a GPS receiver,
etc. when pushed for 1 sec.
y CHANNEL/WEATHER CHANNEL SWITCH
[CH/WX•
DUAL
]
➥ Selects and toggles the regular channels and weather
channel when pushed momentarily. (p. 6)
➥ Starts dualwatch or tri-watch when pushed for 1 sec.
(p.9)
➥ Stops dualwatch or tri-watch when either is activated.
u SCAN SWITCH [SCAN•
TAG
]
➥ Starts and stops normal or priority scan.
➥ Sets or clears the displayed channel as a tag (scanned)
channel when pushed for 1 sec.
➥ While pushing [HI/LO] on the microphone, clears all tag
channels in the selected channel group when pushed
for 3 sec.
for 3 sec.
i CHANNEL UP/DOWN SWITCHES [Y
Y]/[Z
Z]•
[U/I/C]
➥ Selects an operating channel. (p. 6)
➥ Selects the SET mode condition of item. (p. 12)
➥ While pushing [SCAN
•TAG
], push [Y]/[Z] to adjust the
brightness of the LCD and switch backlight.
➥ Selects one of 3 regular channels in sequence when
both switch are pushed. (p. 6)
• International, U.S.A. and Canadian channels are available for
regular channels.
Speaker
Function display
q
w
i
u y t r e
!IC-M302_draft.qxd 03.9.1 6:02 PM Page 2 (1,1)