ICOM 269700 ユーザーズマニュアル
43
9
CONNECTIONS AND MAINTENANCE
■ Connections
q DC POWER CONNECTOR
Connects the supplied DC power cable from this connector
to an external 13.8 V DC power source.
to an external 13.8 V DC power source.
w EXTERNAL MICROPHONE JACKS
Connects to optional HM-127
REMOTE-CONTROL MICRO-
PHONE
.
CAUTION: NEVER
connect other microphones, such
as the HM-134, as this may cause damage to the transceiver.
e ANTENNA CONNECTOR
Connects a marine VHF antenna with a PL-259 connector.
CAUTION:
Transmitting without an antenna may dam-
age the transceiver.
r NMEA IN (Red)/NMEA OUT (White) JACKS
Connects to a GPS receiver for position and time indica-
tions.
tions.
• An NMEA0183 ver. 2.0 or 3.01 (sentence formatters RMC,
GGA, GNS, GLL) compatible GPS receiver is required. Ask your
dealer about suitable GPS receivers.
dealer about suitable GPS receivers.
Connects to a PC or navigation equipment (NMEA0183
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.
ver. 3.01 sentence formatters DSC, DSE compatible) for
plotting received other ships position data.
t EXTERNAL SPEAKER JACK
➥Connects to an external speaker.
CAUTION:
After connecting the DC power cable, NMEA
IN/OUT jacks and external speaker jack cover the connec-
tor and jacks with a rubber vulcanising tape as shown
below, to prevent water seeping into the transceiver.
tor and jacks with a rubber vulcanising tape as shown
below, to prevent water seeping into the transceiver.
Rubber vulcanizing
tape
tape
NMEA OUT (+)
RCA
NMEA OUT (–)
NMEA IN (+)
RCA
NMEA IN (–)
q
w
e
t
r
r
9