ICOM 279100 ユーザーズマニュアル

12

4

■

The transceiver has 200 memory channels for storage of 
often-used frequencies, along with 6-character notes.

q 

Push [MR•

MW

] to select the memory mode.

  • The memory BANK number and memory CH number appears.

Using [DIAL]:
w 

 Push 

, then push [0•

BANK

], and rotate [DIAL] to select 

the desired memory BANK number. Push 

 and push 

[0•

BANK

] (or push [CLR•

DEL

]) to exit the BANK selection 

mode.

e 

Rotate [DIAL] to select the desired memory CH number.

  •  If no memory CH is programmed in the selected BANK, no 

memory CH selection is available.

Using the Keypad:
w 

 Push 

, and push [0•

BANK

], then push the appropriate 

digit key ([0•

BANK

] to [9•

TAG

]) to select the desired mem-

ory BANK number, then push 

 and push [0•

BANK

] (or 

push [CLR•

DEL

]) to exit the BANK-selection mode.

e 

 Push 2 appropriate digit key (00 to 19) to select the de-
sired memory CH number.

  •  If no memory CH is programmed in the selected BANK, no 

memory CH selection is available.

NOTE: Comments appear first when programmed, how-
ever, the transceiver can be programmed by your dealer 
to show the operating frequency first. Push [MR•

MW

] to 

display the comment in this case.

■

This function transfers a memory channel’s contents into the 
frequency mode. This is useful when searching for signals 
around a memory channel’s frequency.

q

 Push [MR•

MW

] to select memory mode.

w

  Select the desired memory channel to be transferred 

using [DIAL] or keypad.

e

   Push 

, then push [MR•

MW

] to transfer the memory 

channel’s contents into the frequency mode.

  •  BANK number and memory CH number disappears as fre-

quency mode is automatically selected and the memory con-
tents are transferred.

Memory mode

Frequency mode