ICOM 316800 ユーザーズマニュアル
■
Call channel programming
Call channel is used to access Channel 9 (default), however,
you can program the call channel with your most often-used
channels in each channel group for quick recall.
you can program the call channel with your most often-used
channels in each channel group for quick recall.
q
Push and hold
[CH/WX U/I/C] for 1 sec. several times to
select the desired channel group (U.S.A., International or
Canada) to be programmed. (p. 9)
Canada) to be programmed. (p. 9)
w
Push and hold
[16 9] for 1 sec. to select the call channel
of the selected channel group.
• “
CALL” and call channel number appear.
e
Push and hold
[16 9] again for
3 sec. (until a long beep changes
to 2 short beeps) to enter the call
channel programming mode.
to 2 short beeps) to enter the call
channel programming mode.
• Channel number starts blinking.
r
Push
[Y]/[Z] to select the desired
channel.
t
Push
[16 9] to program the dis-
played channel as the call chan-
nel.
nel.
• The channel number stops blinking.
■
Adjusting the volume level
The volume level can be adjusted with
[VOL/SQL MONI]
and
[Y]/[Z].
q
Push
[VOL/SQL MONI] once to enter the volume adjust-
ment mode, then adjust the volume level with
[Y]/[Z].
• “
VOL” indicator starts blinking.
• The transceiver has 31 volume levels and OFF.
• With no key operation is performed for 5 sec., the transceiver
returns to the normal condition.
w
Push
[VOL/SQL MONI] twice to exit the volume adjust-
ment mode.
11
4
BASIC OPERATION
1
2
3
4
5.
6
7
8
9
10
11
12
13
14
15.
16
2
3
4
5.
6
7
8
9
10
11
12
13
14
15.
16
Indicates the
volume level.
volume level.
Blinks while adjusting the volume level.