ICOM 318300 ユーザーズマニュアル
94
8
DV MODE OPERATION
8
N
When the IC-9100 receives a signal from a D-STAR
repeater, it receives four call signs: the calling station’s
call sign, the called station’s call sign, the R1 repeater
call sign (the repeater that receives a signal from the
calling station on the uplink frequency), and the R2 re-
peater call sign (the repeater that transmits a signal
ON
repeater, it receives four call signs: the calling station’s
call sign, the called station’s call sign, the R1 repeater
call sign (the repeater that receives a signal from the
calling station on the uplink frequency), and the R2 re-
peater call sign (the repeater that transmits a signal
ON
Station A
Station B
Repeater
446.000 MHz
445.400 MHz
445.400 MHz
446.000 MHz
Uplink
Downlink
(Transmit frequency)
(Receive frequency)
s
q Select the desired frequency band. (p. 35)
w Push [VFO/MEMO] to select the VFO mode.
e Push [A/B] once or twice to select VFO A.
r Set the desired repeater transmit (downlink) fre-
quency. (p. 37)
s
t Push [MENU] to display the “M1” screen (Menu 1).
y Hold down [DUP](F-2) for 1 second to turn ON the
One-touch repeater function.
s
s
bottom of the function display.
u Push [DUP](F-2) once or twice to switch the offset
to the desired direction.
s
s
tion is not necessary (Only U.S.A. and Korean versions).
(p. 67)
(p. 67)
i Push [DVsDR] to select the DV mode. (p. 43)
s
s
o When a signal is received, the calling station’s call
sign is displayed on the LCD.
s
sage, it is displayed after the call sign.
See the next page to view the received call sign.
To reply to the calling station, see page 96.
To reply to the calling station, see page 96.
[VFO/MEMO]
[A/B]
[DV
・DR]
“T” disappears
Appears
M 1
D U P
A G C
A F C
T O N
S C P
4 4 5 . 4 0 0 0 0
M 1
D U P
A G C
A F C
D S Q
S C P
4 4 5 . 4 0 0 0 0
Appears
Uplink frequency
Appears