ICOM 325300 ユーザーズマニュアル

19

4

BASIC OPERATION

N Setting a tuning step

The tuning step can be selected for both band. The following 
tuning steps are available for the IC-T70A/T70E.

• 5.0 kHz

• 10.0 kHz

• 12.5 kHz

• 15.0 kHz

• 20.0 kHz

• 25.0 kHz

• 30.0 kHz

• 50.0 kHz

• 100.0 kHz

• 125.0 kHz

• 200.0 kHz

D Tuning step selection

q  In the VFO mode, push [BAND] to select the desired fre-

quency band.

• If the VFO mode is not selected, such as a memory channel/call 

channel mode or the weather channel mode, push [V/M/C] to 
select the VFO mode first, then push [BAND] to select the de-
sired band.

w  Push [SET] to enter the Set mode.

e  Rotate [DIAL] to select the tuning step set item, then ro-

tate [VOL] to select the desired tuning step.

rPush [V/M/C] to return to the VFO mode.

[VOL]

[DIAL]

5 kHz tuning step

N Setting a frequency

D Using the dial

q  Push [V/M/C] to select the VFO mode, if any other mode is 

selected.

w  Push [BAND] to select the desired frequency band.

eRotate [DIAL] to select the desired frequency.

• The frequency changes according to the preset tuning steps. 

See the previous content to set the tuning step.

[DIAL]

[DIAL] changes the frequency
according to the selected
tuning step.

Push [BAND]