ICOM 329600 ユーザーズマニュアル
57
6
CONNECTION AND INSTALLATION
2001 NEW
2001 NEW
q
Attach the mounting plates, and tighten the 2 sup-
plied M5
×
8 screws on each side.
w
Put the mounting bracket on the board, and then
tighten the 4 supplied screws (M5
×
20).
e
Attach the Main unit to the mounting bracket, as
shown below.
Not supplied by Icom
r
The completed mounting should look like this.
• Mounting on the board
R
WARNING!
Mount the mounting bracket with
4 supplied screws to surface that is more than 40
mm thick and can support more than 10 kg. The
unit must be mounted on only a flat hard surface.
mm thick and can support more than 10 kg. The
unit must be mounted on only a flat hard surface.
D
Mounting the transceiver
A supplied mounting bracket is used to mount the
transceiver or transceiver’s Main unit to a flat surface.
transceiver or transceiver’s Main unit to a flat surface.