ICOM AP-3 ユーザーズマニュアル
COMPUTER SETTINGS
5
34
5-3 Checking the Network Settings
Use one of the following procedures (depending on
the operating system) to check, release, or reaac-
quire IP address settings that were obtained auto-
the operating system) to check, release, or reaac-
quire IP address settings that were obtained auto-
matically.
■
Windows 95 and 98
For Windows 95 and 98, use the winipcfg.exe file in the
Windows folder.
[Steps]
1. Click <Start> and select [Run].
2. Type “winipcfg” into the text box and press the [Enter]
Windows folder.
[Steps]
1. Click <Start> and select [Run].
2. Type “winipcfg” into the text box and press the [Enter]
key.
• The following screen will appear when the application
• The following screen will appear when the application
starts up:
3. Click the
▼
button on the right side of the text box and
select the name of the Ethernet card being used.
Check or release the setting values, or reacquire the
settings.
Check or release the setting values, or reacquire the
settings.
●
Adapter address : MAC address of Ethernet card