ICOM ic-756pro ユーザーズマニュアル
72
9
SET MODE
■
Miscellaneous (others) set mode
(continued)
CI-V baud rate
This item sets the data transfer rate. 300, 1200, 4800,
9600, 19200 bps and “AUTO” are available.
9600, 19200 bps and “AUTO” are available.
When “AUTO” is selected, the baud rate is automati-
cally set according to the connected controller or re-
mote controller.
cally set according to the connected controller or re-
mote controller.
A
AU
UT
TO
O
Auto baud rate
(default)
(default)
1
19
92
20
00
0
19200 bps
CI-V address
To distinguish equipment, each CI-V transceiver has
its own Icom standard address in hexadecimal code.
The IC-756PRO’s address is 5Ch.
its own Icom standard address in hexadecimal code.
The IC-756PRO’s address is 5Ch.
When 2 or more IC-756PRO’s are connected to an
optional CT-17
optional CT-17
CI
-
V LEVEL CONVERTER
, rotate the tun-
ing dial to select a different address for each
IC-756PRO in the range 01h to 7Fh.
IC-756PRO in the range 01h to 7Fh.
5
5C
Ch
h
Address of 5Ch
(default)
(default)
7
7F
Fh
h
Address of 7Fh
CI-V transceive
Transceive operation is possible with the IC-756PRO
connected to other Icom HF transceivers or receivers.
connected to other Icom HF transceivers or receivers.
When “ON” is selected, changing the frequency, op-
erating mode, etc. on the IC-756PRO automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
erating mode, etc. on the IC-756PRO automatically
changes those of connected transceivers (or re-
ceivers) and vice versa.
O
ON
N
Transceive ON
(default)
(default)
O
OF
FF
F
Transceive OFF
CI-V with IC-731
When connecting the IC-756PRO to the IC-735 for
transceive operation, you must change the operating
frequency data length to 4 bytes.
transceive operation, you must change the operating
frequency data length to 4 bytes.
• This item must be set to “ON” only when operating trans-
ceiver with the IC-735.
O
ON
N
4 bytes of frequency data
O
OF
FF
F
5 bytes of frequency data
(default)
(default)
Mic Up/Down Speed
This item sets the rate at which frequencies are
scanned when the microphone [UP]/[DN] switches
are pushed and held. High or low can be selected.
scanned when the microphone [UP]/[DN] switches
are pushed and held. High or low can be selected.
H
HI
IG
GH
H
High speed (default,
50 tuning steps/sec.)
50 tuning steps/sec.)
L
LO
OW
W
Low speed
(25 tuning steps/sec.)
(25 tuning steps/sec.)