CviLux Corporation FSR001 ユーザーズマニュアル

Wi-Fi Smart Box supports up to 10 partitions display, the largest capacity 

support to 2TB. Wi-Fi Smart Box is with built-in USB 2.0 Host (with 5V OUT 

Interface), you can always expand the storage space in flash drive or carry out 

information exchange and management. First, please set the flash drive into 

the Wi-Fi Smart Box expansion USB interface, in this time, there will be new 

disk “USB1” on the APP or WEB Explorer, allows the users for operation. 

(expanded capacity will be based on flash memory capacity).

 

 

Step 7: Turn on and Use Power Bank Function 

In the state of shutdown, short press Wi-Fi Smart Box power button 

(approximately 0.5 seconds), it will display the current battery capacity for 3 

seconds. So when the 5V OUT interface has been inserted with i-Pad, i-Phone, 

tablet PCs and smart phones and other devices for charging, then charge 

indicator blue light, will follow the counterclockwise descending display, and 

will begin to charge for external devices. If the device is fully charged or lost 

the connection with Wi-Fi Smart Box, the displaying of Wi-Fi Smart Box power 

indicator will be in counterclockwise descending. And Wi-Fi Smart Box will 

enter the state of shutdown automatically. 

 

Note: 

a. When the battery indicator is only a blue light and flashing, that means the 

system enters the low-voltage, please charge. 

b. When the battery indicator while four blue lights flashing quickly, that means 

the system into over voltage / over current / temperature protection status, 

please remove the external charging device, and need to wait for some time, 

until no flashes fast again, and then try to turn on the power. 

c. Under the Power Bank function mode, 5V OUT interface can only be used 

for external charging, can not be used for USB Host function

 

Remark A: Wi-Fi Smart Box support WEB across systems 

 

computer or mobile device with Wi-Fi connectivity, by wireless connection.   

The first, please switch on Wi-Fi function from the Wi-Fi settings page on 

device. Please select "WS227" under “Choose a Network＂and start the 

connection (Because the ways of every device for turning on Wi-Fi and access 

point are different, please follow the various devices’ operation)   

After you connect with Wi-Fi Smart Box, please implement Internet Brower of 

computer/device. The Home screen will automatically switch to the pages of