ELDES ESIM364 ユーザーズマニュアル
93
93
EN
MANUAL ELDES ESIM364 V1.5
27. SYSTEM NOTIFICATIONS
In case of a certain event, the system attempts to send an SMS text message to the first preset user phone number only. If the user phone
number is unavailable and the system fails to receive the SMS delivery report during 20 seconds, it will attempt to send the SMS text mes-
sage to the next preset user phone number, assigned to the same partition as the previous one. The user phone number may be unavailable
due to the following reasons:
• mobile phone was switched off.
• was out of GSM signal coverage.
• was out of GSM signal coverage.
The system will continue sending the SMS text message to the next preset user phone numbers in the priority order until one is available.
The system sends the SMS text message only once and will not return to the first user phone number if the last one was unavailable.
When using Dual-SIM feature, the Secondary SIM card is involved in the communication process. For more details, please refer to 31. DUAL
SIM MANAGEMENT.
The following table provides the description of system notifications by SMS text message sent to the user phone number.
Seq. No. Event
Description
1
System armed
SMS text message sent to the user regarding armed system.
2
System disarmed
SMS text message sent to the user about disarmed system.
3
General alarm
SMS text message sent to the user in case of system alarm occurrence.
4
Mains power loss/
restore
SMS text message sent to the user in case the mains power supply is lost or restored
5
Battery failed
SMS text message sent to the user in case the backup battery resistance is 2Ω or higher
(battery requires replacement).
6
Battery dead
or missing
SMS text message sent to the user in case the backup battery is not present or the battery voltage
runs below 5V.
7
Low battery
SMS text message sent to the user in case the backup battery voltage is 10.5V or lower.
8
Siren fail/restore
SMS text message sent to the user in case the siren is disconnected/broken or connected/fixed.
9
Date/time not set
SMS text message sent to the user in case system date & time is not set.
10
GSM connection failed SMS text message sent to the user in case the GSM connection is lost.
11
GSM/GPRS antenna
fail/restore
SMS text message sent to the user in case the GSM/GPRS antenna is disconnected/broken or
connected/broken.
12
Tamper alarm
SMS text message sent to the user in case of tamper violation. Indicated as Tamper x.
13
Keypad failed
SMS text message sent to the user in case the keypad is disconnected/broken.
14
Temperature info
SMS text message sent to the user in case of temperature deviation by the set values.
15
System started
SMS text message sent to the user on system startup.
16
Periodical info
Info SMS text message sent to the user periodically by the set values.
17
Wireless signal loss
SMS text message sent to the user in case the wireless signal is lost. Indicated as Tamper x *.
ATTENTION:
The following methods provide the configuration of the master parameters, which override the notification parameters
described in 12.9. Disabling and Enabling Arm/Disarm Notifications.