Fibar Group S.A. FGS223 ユーザーズマニュアル

17

ADVAnCED PARAMETERS

12. First channel - time parameter for delay/auto ON/OFF modes
This parameter allows to set time parameter used in timed modes. 

Available settings: 0  (0.1s), 1-32000 (1-32000s, 1s step) - time  

parameter

Default setting: 

50 (50s)

Parameter size:

2 [bytes]

13. First channel - pulse time for flashing mode
This parameter allows to set time of switching to opposite state in 

flashing mode.

Available settings: 1-32000 (0.1-3200.0s, 0.1s step) - time param-

eter

Default setting: 

5 (0.5s)

Parameter size:

2 [bytes]

15. Second channel - operating mode (FGS-223 only)
This parameter allows to choose operating for the 1st channel con-

trolled by the S2 switch. 

Available settings: 0 - standard operation

1 - delay On
2 - delay OFF
3 - auto On
4 - auto OFF
5 - flashing mode

Default setting: 

Parameter size:

1 [byte]

modes (FGS-223 only)
This parameter determines how the device in timed mode reacts to 

pushing the switch connected to the S2 terminal.

Available settings: 0 - cancel mode and set target state

1 - no reaction to switch - mode runs until it ends
2 - reset timer - start counting from  the beginning

Default setting: 

Parameter size:

1 [byte]

modes (FGS-223 only)
This parameter allows to set time parameter used in timed modes. 

Available settings: 0  (0.1s), 1-32000 (1-32000s, 1s step) - time  

parameter

Default setting: 

50 (50s)

Parameter size:

2 [bytes]