Unicorn Srl MMMFD ユーザーズマニュアル

ページ / 4
 
Line-In MODE 
Connect the 3,5” jack audio source to the microUSB port of Fever. 
Short Press the “M” button until Fever switches to Line-IN 
mode (Mode LED red). Red light on.During the Line IN operational 
mode, all the functions can be controlled both through the 
External Source and the Bottom Control Panel: 
• PAUSE/PLAY: short press “ ” Button 
• Volume Control: long press “+”/“-” 
• Track Control: short press “+” / “-” 
 
FM Radio MODE 
Press the “M” button until Fever switches to the FM Radio mode 
(Both Bluetooth LED and Mode LED off). 
• Synthonize and store: Long press “ ”. for auto-searching 
and store FM station; green light blinking,when finish searching, 
the green light goes off. 
• Volume Control: long press “+”/“-” 
• FM Radio Control: short press “+” / “-” 
 
Micro-SD card Reader MODE 
Fever can be used with TF cards (Micro-SD) with your 
favourite MP3, WAV and WMA music tracks. TF card 
maximum capacity supported is 32GB. 
Plug your Micro-SD card into the “Micro-SD card Slot”; 
Fever will automatically switch into Micro-SD card Reader 
Mode (Mode LED green) and will start reproducing the 
SD card content. 
During the Micro-SD card Reader, all the functions can be 
controlled through the Bottom Control Panel: 
• PAUSE/PLAY: short press “ ” Button 
• Volume Control: long press “+”/“-” 
• Track Control: short press “+” / “-” 
 
 
PROBLEM SHOOTING 
1 UNABLE TO PAIR WITH BLUETOOTH ® DEVICE? 
Confirm that your phone/device is Bluetooth compatibleand 
make sure that the “Bluetooth Connection” operational mode 
is ON and that the Bluetooth Led is lighted. 
2. NO SOUND? 
Make sure that the desired operational mode is coherent with 
the selection done on the Fever and with the selected device. 
Raise the volume both on Fever and on the phone/device.