Vivint. Inc. CM01 ユーザーズマニュアル
4
Factory reset the camera
1. Unplug the camera.
2. Wait 1 minute for the camera to completely power off.
3. While the power is off, press and continue to hold down the power
2. Wait 1 minute for the camera to completely power off.
3. While the power is off, press and continue to hold down the power
button on the camera.
4. With the power button pressed down, plug the camera back in to the
wall outlet. Keep the button pushed down.
5. After plugging in the camera, continue holding the power button down
for 10 more seconds. The LED light will start to flash red.
6. You can now let go of the power button.
7. Wait 3 minutes for the camera to reset to factory default settings.
7. Wait 3 minutes for the camera to reset to factory default settings.
Move the camera closer to the panel
1. If the camera is still not connecting to the panel, it is possible that the
camera simply has a poor Wi-Fi connection. Move the camera physically
closer to the panel, and then try to reconnect it to the panel.
closer to the panel, and then try to reconnect it to the panel.