Grizzly Industrial Inc T25448ACRE ユーザーズマニュアル

ページ / 4
For questions or help with this product contact Tech Support at (570) 546-9663 or techsupport@grizzly.com
MODEL T25448/T25449
DUST COLLECTOR
REMOTE SWITCH
INSTRUCTIONS
COPYRIGHT © FebRuaRY, 2013 bY GRIZZLY INDuSTRIaL, INC.
NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE
 OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
 FOR MODeLS MaNuFaCTuReD SINCe 8/13  #TS15583  PRINTeD IN TaIwaN
Introduction
The  Model  T25448/T25449  Dust  Collector 
Remote Switch (
Figure 1) allows you to remotely 
turn a dust collector 
ON/OFF from a distance of 
up to 75 feet.
Read and understand this entire document before 
installation  to  make  sure  this  switch  box  fits  the 
intended application.
To ensure safe operation:
•  Only connect the switch box to power sup-
ply that meets the listed specifications.
• Do not connect the switch box to a dust 
collector with a motor that exceeds the 
listed specifications.
Specifications
Model T25448:
 
Power Supply ....................110V, 15a, 60 Hz
 
Outlet Type ................................. NeMa 5-15
 
Max. Dust Collector HP ..................... 1.5 HP
Model T25449:
 
Power Supply ................... 220V, 20a, 60 Hz
 
Outlet Type .................................NeMa 6-20
 
Max. Dust Collector HP ........................ 3 HP
Remote battery ..........................Type 23ae, 12V
Communication Type ........Radio Frequency (RF)
Max. Communication Distance ................... 75 ft.
• This remote switch is ONLY designed to 
be used on dust collectors with standard 
ON/OFF toggle or push-button switches—
not with magnetic switches.
• If you are unsure about the type of dust 
collector switch you have, contact the dust 
collector manufacturer for more informa-
tion.
• Using this switch box for applications 
other than dust collectors may cause the 
unit to fail and will void the warranty.
Replacement remote controllers (Model 
T25507) can be purchased by contacting 
Grizzly at (800) 523-4777. Before the new 
remote controller can be used, the switch 
box must be programmed to work with it 
(refer to Programming Switch Box on Page 
2 for detailed instructions).
Figure 1. Model T25448/T25449 remote switch 
components.
Switch 
box
Remote 
Controller