Gibson Innovations Limited E300BT ユーザーズマニュアル
QUICK START
GUIDE
Quick start guide
[ 1.0 Charge the battery ]
1. Plug one end of USB cable into the charger (or into the USB port of a computer).
2. Plug the other end of the cable into the micro USB charging slot on the headset.
3. When the headset is charging, a white indicator light will be displayed.
4. When the headset is fully charged, the white light goes off.
2. Plug the other end of the cable into the micro USB charging slot on the headset.
3. When the headset is charging, a white indicator light will be displayed.
4. When the headset is fully charged, the white light goes off.
1. Turn the headset on. Press and hold for 2 sec.
2. Turn the headset off. Press and hold for 4 sec. A white
indicator light turns on for 1.5 sec. and then the
headset will turn off.
headset will turn off.
Please refer to www.onkyo.com/welcome for the full user manual
Volume/
Track
control
Pair the headset with your phone manually or by using NFC. After successful pairing, the
headset connects automatically to the phone once the headset is turned on and within range.
headset connects automatically to the phone once the headset is turned on and within range.
Microphone
[ 2.0 Turn on and off the headset ]
[ 3.0 Pair the headset with your phone ]
1. Make sure your headset is turned off.
2. Press and hold until an alternating blue and white
2. Press and hold until an alternating blue and white
light flashes.
3. Turn on the Bluetooth function on your phone.
4. Your phone will start searching for Onkyo E300BT.
5. Follow the on-screen instructions to pair your phone.
4. Your phone will start searching for Onkyo E300BT.
5. Follow the on-screen instructions to pair your phone.
(Check your phone’s user manual for details)
‘0000’ not required for
some mobile phones
Settings
Select
Back
Connectivity
10:32
Enter Password
****
0000
Settings
Devices Found
Select
Back
10:31
Onkyo E300BT
Settings
Bluetooth
Bluetooth
Select
Back
Connectivity
10:30
Add
Bluetooth
device
[ 3.1 Manual Pairing ]
www.onkyo.com
E300BT
Languages x 1: EN
QUICK START GUIDE
Box size: W95 x H150 x D25 mm
QSG size: W89 x H144 mm( Folded)
Binding: 1. Folded / 2. Glue / 3.Saddle stitch
Sleeve size: W210 x H50 mm
QSG (A1/B1) - Print color: 2 colors ( Black + PMS186c)
Revised illustration_EN (2015.07.20)
A white light triple flashes every 10 seconds.
An alternating white and blue light flashes.
A blue light flashes at every 8 seconds.
A blue light flashes rapidly.
The battery is low.
The headset is in pairing mode.
The headset is switched on but not connected.
If no connection can be made, the headset will
turn off itself after 5 minutes.
If no connection can be made, the headset will
turn off itself after 5 minutes.
The headset is both paired & connected.
[ 5.0 LED Indicator light ]
Mute/unmute the mic
while in a call
while in a call
Press once
MUSIC CONTROLS
CALL CONTROLS
Volume up
Press once
[ 4.0 Use music and call controls ]
Play/Pause
Press once
Reject incoming call
Press & hold
for 2 sec.
for 2 sec.
Press twice
Pick up call/Hang up
Press once
Switch caller while
in a call
in a call
Micro USB
charging slot
On/Off button,
Music/Call
control
1. Make sure you turn on the NFC function on your phone
and that your phone’s screen remains active.
2. Place your phone over the NFC detection area at the
back of the in-line control.
3. Follow the pairing instructions of your phone. If a
passcode is required, enter ‘0000’.
Remarks:
• Make sure your mobile phone has the NFC feature and that the NFC function has been switched on and your
• Make sure your mobile phone has the NFC feature and that the NFC function has been switched on and your
phone is not in standby mode.
• Pairing with NFC is suitable only for Android mobile operating system 4.2 or above.
• Refer to your phone’s user manual to identify its NFC detection area.
• Refer to your phone’s user manual to identify its NFC detection area.
[ 3.2 NFC Pairing ]
NFC detection area
LED
indicator
light
E300BT
EN
Skip forward
Long Press
Volume down
Press once
Skip backward
Long Press
2015 © Gibson Innovations Limited.
All rights reserved.
This product has been
manufactured by, and is sold under
the responsibility of Gibson
Innovations Ltd., and Gibson
Innovations Ltd. is the warrantor in
relation to this product.
Gibson Innovations Netherlands
B.V. Building
All rights reserved.
This product has been
manufactured by, and is sold under
the responsibility of Gibson
Innovations Ltd., and Gibson
Innovations Ltd. is the warrantor in
relation to this product.
Gibson Innovations Netherlands
B.V. Building