Gibson Innovations Limited OKAT3X ユーザーズマニュアル
EN
1 Important
Safety
Warning
• Never remove the casing of this speaker.
• Never lubricate any part of this speaker.
• Never place this speaker on other electrical
equipment.
• Keep this speaker away from direct sunlight, naked
flames or heat.
Important safety instructions
a Read these instructions.
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in
b Keep these instructions.
c Heed all warnings.
d Follow all instructions.
e Do not use this apparatus near water.
f Clean only with dry cloth.
g Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
h Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
(including amplifiers) that produce heat.
i Only use attachments/accessories specified by the
manufacturer.
j Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
been damaged in any way, such as liquid has been
spilled or objects have fallen into the apparatus,
the apparatus has been exposed to rain or
moisture, does not operate normally, or has been
dropped.
k Battery shall not be exposed to excessive heat such
as sunshine, fire or the like.
l Apparatus shall not be exposed to dripping or
splashing.
m Do not place any sources of danger on the
apparatus (e.g. liquid filled objects, lighted candles).
Note
• The type plate is located on the bottom of the
product.
2 Notice
Any changes or modifications made to this device that
are not expressly approved by Gibson Innovations may
void the user’s authority to operate the equipment.
are not expressly approved by Gibson Innovations may
void the user’s authority to operate the equipment.
Notice for the USA and Canada
This device complies with Part 15 of the FCC Rules
and license-exempt RSS standard of Industry Canada.
Operation is subject to the following two conditions:
This device complies with Part 15 of the FCC Rules
and license-exempt RSS standard of Industry Canada.
Operation is subject to the following two conditions:
1
this device may not cause harmful interference,
and
and
2
this device must accept any interference received,
including interference that may cause undesired
operation.
including interference that may cause undesired
operation.
T3
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Relocate the receiving antenna.
to provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to
radio communications.
However, there is no guarantee that interference will
not occur in a particular installation. If this equipment
does cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following
measures:
• Relocate the receiving antenna.
• Increase the separation between equipment and
receiver.
• Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
connected.
• Consult the dealer or an experienced radio/TV
technician for help.
CAN ICES-3(B)/NMB-3(B)
Disposal of your old product and battery
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This product may contain lead and mercury.
Disposal of these materials may be regulated due to
environmental considerations. For disposal or recycling
information, please contact your local authorities.
Your product is designed and manufactured
with high quality materials and components,
which can be recycled and reused.
This product may contain lead and mercury.
Disposal of these materials may be regulated due to
environmental considerations. For disposal or recycling
information, please contact your local authorities.
This product contains non-removable batteries:
• Do not incinerate. Batteries may explode if
• Do not incinerate. Batteries may explode if
overheated.
• For disposal or recycling information, please contact
your local authorities.
Caution
•
Removal of the built-in battery invalidates the warranty
and may destroy the product.
and may destroy the product.
Always bring your product to a professional to remove
the built-in battery. (
the built-in battery. (
Fig. A)
Environmental information
All unnecessary packaging has been omitted. We have
tried to make the packaging easy to separate into three
materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company.
Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and
old equipment.
The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc. and
any use of such marks by Gibson Innovations Limited
is under license. ONKYO® is a registered trade mark of
ONKYO Corporation. Other trademarks and trade names
are those of their respective owners.
All unnecessary packaging has been omitted. We have
tried to make the packaging easy to separate into three
materials: cardboard (box), polystyrene foam (buffer) and
polyethylene (bags, protective foam sheet.)
Your system consists of materials which can be recycled
and reused if disassembled by a specialized company.
Please observe the local regulations regarding the
disposal of packaging materials, exhausted batteries and
old equipment.
The Bluetooth® word mark and
logos are registered trademarks
owned by Bluetooth SIG, Inc. and
any use of such marks by Gibson Innovations Limited
is under license. ONKYO® is a registered trade mark of
ONKYO Corporation. Other trademarks and trade names
are those of their respective owners.
A
T3_37_addendum.indd 1
26/05/2016 11:14:03 AM