Gibson Innovations Limited SHB4805 ユーザーズマニュアル

5

EN

3  Get started

Charge your headphones

Warning

 

•

Only charge with certified USB adaptor DC 
5V/0.5A.

Note

 

•

Before you use your headphones for the 
first time, charge the battery for 5 hours for 
optimum battery capacity and lifetime.

 

•

Use only the original USB charging cable to 
avoid any damage.

 

•

Finish your call before charging the 
headphones, as connecting the headphones 
for charging will power the headphones off.

Connect the supplied USB charging 
cable to: 

•  the micro USB charging slot on 

the headphones and; 

•  the certified charger/USB port 

of a computer. 

 

» LED turns white during 

charging and turns off when the 
headphones is fully charged.

Tip

 

•

Normally, a full charge takes 3 hours.

Pair the headphones 

with your mobile phone

Before you use the headphones 
with your mobile phone for the first 

time, pair it with a mobile phone. 
A successful pairing establishes a 
unique encrypted link between the 
headphones and mobile phone. The 
headphones store the last 4 devices 
in the memory. If you try to pair more 
than 4 devices, the earliest paired 
device is replaced by the new one. 

1 

Make sure that the headphones 
are fully charged and turned off.

2 

Press and hold 

 for 5 seconds 

until the blue and white LED 
flashes alternately.

 

» The headphones remain in 

pairing mode for 5 minutes.

3 

Make sure that the mobile phone 
is turned on and its Bluetooth 
feature is activated.

4 

Pair the headphones with the 
mobile phone. For detailed 
information, refer to the user 
manual of your mobile phone.

The following example shows you 
how to pair the headphones with your 
mobile phone.

1 

Activate the Bluetooth feature of 
your mobile phone, select Philips 
Everlite SHB4805.

2 

Enter the headset password 
"

0000" (4 zeros) if prompted. For 

those mobile phones featuring 
Bluetooth 3.0 or higher, no need 
to enter a password.

Philips Everlite SHB4805

SHB4405