MEDTRUM TECHNOLOGIES Inc. FM006 ユーザーズマニュアル

3. Remove the old battery and dispose of it per the disposable requirements of your state or country. Put the new

battery in the PDM. Check the diagram inside the compartment to make sure the battery is inserted correctly.

Note: Do NOT use batteries that have been in cold storage, such as in the refrigerator or in your car during winter in

cold climates.

4. Replace the battery door by pushing the compartment latch along with the direction of arrow.

5. Turn the PDM face-up. The PDM has begun to power on automatically. It will show one or more screens until the

HOME screen appears.

If the HOME screen does not appear, do these steps:

a. Check that the battery is inserted correctly. If the battery has been installed backwards, remove the

battery and install it properly.

b. If your pump still does not turn on or you get a FAILED BATT TEST alarm, remove and replace the

battery with a new one.

If the pump is still not on, call your local help line or representative.

6. Check to make sure the time and date are correct. If more than 5 minutes have passed since you removed the

battery, you will be prompted to check the time and date. Refer to the “Set the time and date” in the “How to use

the PDM” chapter for programming instructions.