MatterPort Inc. MC200 ユーザーズマニュアル

 

 

Tap this button when you are done capturing.  This tells the Cloud that there are no more 

sweeps coming, and it can go ahead and process your job into a 3D model.  Once a job has 
been Completed, this button will change to a grey indicator of upload status. 

This deletes the job off of the iPad, and is useful if you are running out of storage space on 

the iPad, or if you just want to clean up your list.  If your job is Complete and has already 

been uploaded to the Cloud, deleting does not affect any of your data on the Cloud.  Your 
original job and 3D model will still be there.  If you have not uploaded your job yet, or if the 

upload has not completed, you will permanently lose that job’s data.   
 

After tapping the Capture button, a Cancel button will appear underneath it for the duration 
of the capture.  Tapping it causes the camera to stop.  The data is thrown out, and the 

camera is immediately ready to capture again.  This is useful when a person accidentally 
walks through a room in the middle of a sweep, or if you realize you forgot to change the 

active sweep after jumping across a section of the house. 

Sometimes a sweep doesn’t align properly and you may want to delete it and try again.  To 

delete a sweep, tap the sweep number on the mini-map.  Choose “Delete Sweep” and 
confirm.  The mini-map will refresh with the sweep removed. 

When jumping from one side of the mini-map to another, or out of a room and back to a 

previously captured area, you will need to choose a new sweep to align to.  We call this the 

“active sweep”, and it is denoted by a bright white circle.  Find the sweep with the most 
common area to your current location.  This will most likely be the sweep closest to your 

current position, though be aware that corners and walls can occlude the space.  Tap the 
sweep and choose “Make Active Sweep”.  This sweep will now have the bright white circle 

indication of the active sweep, and any new sweeps you perform will align to it.