MatterPort Inc. MC200 ユーザーズマニュアル
2
Camera Kit Contents
1 Matterport Camera MC200
1 Charger
1 Charger cord
1 Tripod
1 Bag
Other Items Required
iPad, provided by user. Must be 4
th
generation, model number A1458, A1459, or
A1460
Capture app. Not yet released in the App Store, contact Matterport to install.
How 3D Capturing Works
An iPad, tripod, and camera are the three items required to capture your space in 3D. Snap
the camera onto the tripod and press the power button. On the iPad, launch the Capture
app. Connect the camera to the iPad through a WiFi network, and tap the Capture button.
app. Connect the camera to the iPad through a WiFi network, and tap the Capture button.
The camera rotates around once, gathering data about the room and objects around it, and
sends it to the iPad. This is called a sweep. Move the camera from point to point around a
sends it to the iPad. This is called a sweep. Move the camera from point to point around a
room, typically performing 4-6 sweeps per furnished room. The Capture app stitches
together each sweep, and shows you a floor plan-style map of the space as you go. Each
together each sweep, and shows you a floor plan-style map of the space as you go. Each
sweep is also uploaded to the Cloud, and when the job is complete, our Cloud software turns
the sweeps into a 3D model. You’ll receive an email notification when your model is done.
the sweeps into a 3D model. You’ll receive an email notification when your model is done.
Simply click the link to explore your model in a web browser.
The Six Steps to Create a 3D Model
1. Set up the camera
2. Set up the iPad
2. Set up the iPad
3. Connect the iPad to the camera
4. Capture the space
4. Capture the space
5. Complete the job
6. Explore the model online
6. Explore the model online
1. Set up the Camera
Attach the Quick-Release Plate to the Camera
The tripod comes with a quick-release plate. Screw the plate into the base of the camera.
Set up your Tripod
Fully extend and separate the legs, and place the tripod on a stable surface.
Snap the Camera onto the tripod
Pull the lever on the quick-release plate so that it stays in the open position. Using a slight
rocking motion, firmly place the camera on the tripod. It will snap into place. Make sure it’s
properly attached by picking up the camera.
properly attached by picking up the camera.