PlayJam Ltd GTPJ2368 ユーザーズマニュアル

 
Thank you for purchasing GameStick. Before starting, please take a couple of minutes to read this guide to setting up 

and using GameStick.   

 

•  1 x GameStick (A) 

•  1 x Controller (B) 

•  1 x Mains Power Supply Unit (region specific) (C) 

•  1 x 1m USB to Micro USB Power Cable (for controller) (D) 

•  1 x 30cm Y Cable from Micro USB to Regular USB (type A) (For Stick) (E) 

•  1 x HDMI Extender Cable (F) 

 

•  Wireless internet connection 

•  TV with HDMI port 

•  Access to a device with an internet browser for one-time registration 

 

Shoulder buttons 

BT Pairing 

 

Power button 

D Pad   

Charge points 

Home button   

LED Indicator Strip  

Reset   

Micro USB port 

We recommend that you fully charge the controller before using for the first time. To do this: 

•  Plug cable (D) into the Micro USB port (N) on the front of the controller. 

•  Plug the other end of cable (D) into any powered USB port e.g. on TV, PC or Y cable (E) as per figure 3.  

•  All 4 LED lights will flash at once whilst the controller is charging. 

•  When all four lights remain on, the controller is fully charged. 

•  Power GameStick using the included Y Cable (E) & Power Supply (C) per Figure 3. A white light from within the 

stick indicates power. 

 

•  Plug GameStick into TV’s HDMI port (use the extender cable (F) provided if required).  

•  Switch on controller by pressing and holding the power button (O) for 3 seconds and follow Controller Pairing 

instructions below. 

•  Once the controller is paired, follow the one-time on-screen device and account setup instructions.  

 

 

When you turn on your controller, it will automatically enter pairing mode then connect. Pairing mode is indicated by a 

flashing light on LED Indicator Strip (M). When paired, the light will stop flashing and remain solid. 

 

GameStick supports up to four controllers simultaneously. Successfully connected controllers are represented by 
additional solid lights on LED Indicator Strip (M). 

 

If pairing your controller for the first time, GameStick will scan for available controllers. Once it has detected your 

controller, you will be prompted to press button A to pair that device. This process should take approximately 30 

seconds. 

 
Troubleshooting - If your controller fails to pair, first try rebooting your GameStick by disconnecting then 

reconnecting power and trying again. If this is unsuccessful you will need to reset your controller. To do this, press the