Tri plus grupa d.o.o. RGBWZWUS ユーザーズマニュアル
make your home smart
www.zipato.com
make your home smart
www.zipato.com
TRADEMARKS
Zipato and the Zipato logo are registered Trademarks. All other
product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
product names mentioned herein may be trademarks or registered
trademarks of their respective companies.
IMPORTANT NOTICE
Although Zipato has attempted to ensure the accuracy of the content
of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Zipato assumes no
liability for any error in this publication, and for damages, whether
direct, indirect, incidental, and consequential or otherwise, that may
result from such error, including, but not limited to loss of data or
profit. Zipato provides this publication “as is” without warranty of
any kind, either express or implied, including, but not limited to
implied warranties of merchantability for a particular purpose. The
published information in the manual is subject to change without
notice. Zipato reserves the right to make changes in the product
design, layout, and driver revisions without notify cation to its
users. This version of the Installation guide supersedes all previous
versions.
of this manual, it is possible that this document may contain technical
inaccuracies, typographical, or other errors. Zipato assumes no
liability for any error in this publication, and for damages, whether
direct, indirect, incidental, and consequential or otherwise, that may
result from such error, including, but not limited to loss of data or
profit. Zipato provides this publication “as is” without warranty of
any kind, either express or implied, including, but not limited to
implied warranties of merchantability for a particular purpose. The
published information in the manual is subject to change without
notice. Zipato reserves the right to make changes in the product
design, layout, and driver revisions without notify cation to its
users. This version of the Installation guide supersedes all previous
versions.
ELECTROMAGNETIC COMPATIBILITY
In proper state and when operated properly, the product
complies with all the requirements in respect of interference
radiation according to EN 301 489-17, EN 301 489-1 and EN 300
328. The connections conducting HF signals must neither be
manipulated nor damaged.
complies with all the requirements in respect of interference
radiation according to EN 301 489-17, EN 301 489-1 and EN 300
328. The connections conducting HF signals must neither be
manipulated nor damaged.
TAKE CARE OF YOUR SAFETY
Display extreme caution when using ladders or steps, please follow
manufacturer’s instructions. Be careful when using hand and power
tools and follow the manufacturer’s guidelines when using them.
Take care that the correct tools are used. Wear goggles or protective
clothing where required.
manufacturer’s instructions. Be careful when using hand and power
tools and follow the manufacturer’s guidelines when using them.
Take care that the correct tools are used. Wear goggles or protective
clothing where required.
DANGER
RISK OF ELECTROCUTION
All work on the device should only be carried out by trained
and skilled electricians. Observe the country-specific regulations.
All work on the device should only be carried out by trained
and skilled electricians. Observe the country-specific regulations.
CAUTION
The connected devices and the fl ush-mounted receiver can become
damaged if devices are operated that do not correspond to the
technical specifi cations (see technical data).
damaged if devices are operated that do not correspond to the
technical specifi cations (see technical data).
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
The device has no basic insulation and must therefore be installed in
a way that protects against accidental contact.
The device has no basic insulation and must therefore be installed in
a way that protects against accidental contact.
DANGER
RISK OF FATAL INJURY FROM ELECTRIC CURRENT.
When installing a wall plate, the distance between the cover’s
fixing brackets or screws and the connections of the flush -
mounted MicroModule Switch Single must be at least 4 mm once
installed. If the distance is less than 4 mm, a deeper installation
box must be used. The fixing brackets or screws of the cover must
not press against the housing. Only insulated tools may be used for
operation on the device, e.g. an insulated phase tester.
When installing a wall plate, the distance between the cover’s
fixing brackets or screws and the connections of the flush -
mounted MicroModule Switch Single must be at least 4 mm once
installed. If the distance is less than 4 mm, a deeper installation
box must be used. The fixing brackets or screws of the cover must
not press against the housing. Only insulated tools may be used for
operation on the device, e.g. an insulated phase tester.
INTRODUCTION
THANK YOU
FOR BUYING ZIPATO RGBW LIGHT BULB.
This one will bring more fun in your home environment.
Zipato RGBW BULB has 5 color channels available for your to adjust:
RED, GREEN, BLUE, WARM WHITE and COLD WHITE. Zipato RGBW
BULB can be used to add color to your home or just to lighten it up in
any white color tone you desire. By using Zipabox home controller,
you can control the bulb from anywhere in the world, by using any
smartphone (iOS or Android). Also, you can automatically set colors
of your RGBW BULB to indicate certain events using the Zipato rule
creator. The Zipato RGBW bulb in combination with our Zipabox
home controller grants you unlimited possibilities.
RED, GREEN, BLUE, WARM WHITE and COLD WHITE. Zipato RGBW
BULB can be used to add color to your home or just to lighten it up in
any white color tone you desire. By using Zipabox home controller,
you can control the bulb from anywhere in the world, by using any
smartphone (iOS or Android). Also, you can automatically set colors
of your RGBW BULB to indicate certain events using the Zipato rule
creator. The Zipato RGBW bulb in combination with our Zipabox
home controller grants you unlimited possibilities.
SPECIFICATION
PHYSICAL
E27 standard
POWER
POWER SUPPLY INPUT
100-240VAC, 50/60Hz
STANDBY POWER
0.45W
RADIO
WIRELESS RF MODE FREQUENCY BAND
868.42Mhz
WIRELESS COMMUNICATION PROTOCOL
Z-wave
REGULATORY COMPLIANCE (PENDING)
TEMPERATURE RANGE
OPERATING
0°C TO 40°C (32°F TO 104°F)
STORAGE
-25°C TO 70°C (-13°F TO 158°F)
HUMIDITY
5% TO 95% NON-CONDENSING
TECHNICAL SUPPORT
Having trouble installing your new product?
Zipato’s website contains the latest user documentation and
software updates for Zipato products and services.
software updates for Zipato products and services.
www.zipato.com
CALL SUPPORT
CONTACT LINE
+ 385 1 4004 404
(Mon-Fri) 9.00am-06.00
+ 385 1 4004 404
(Mon-Fri) 9.00am-06.00
RGBW
LIGHT BULB
QUICK INSTALLATION GUIDE
v1.0
HOW TO INSTALL
Activate inclusion mode
of the RGBW bulb by
GENTLY TAPPING the bulb
STEP 4
Activate inclusion mode on
your Z-wave controller
STEP 3
Turn ON
your wall switch
STEP 2
Screw the RGBW bulb in
standard E27 socket
STEP 1
AVAILABLE FOR
TABLET
COMPUTER
SMARTPHONE
CONNECT WHENEVER YOU LIKE VIA
BULB
WIRELESS LIGHTING
24/7
SMART HOME
SERVERS
ZIPATO RGBW LIGHT BULB IS HIGHLY ENERGY EFFICIENT
6.7W
60W
RGBW LIGHT BULB SPEAKS