Gainstrong Industry Co. Ltd GS-OOLITE ユーザーズマニュアル

圳

深

亘强科技  GAINSTRONG 

 

Oolite-V1 wireless routing module Spec 

 

Oolite-v1 is a highly integrated wireless routing module. It is not only a wireless module, it is a 

complete route, only energized, it can work in a wireless AP module, if coupled with a network 

transformer and RJ45 network port, he is one of 3 wireless routing. 

 

Oolite-v1 power is very low, working alone, only 0.36W, very suitable for battery products, it has a 

150M wireless transmission rate, up to 20 GPIOs, can be defined as input and output.   

 

it's design for wifi hard disk, WiFi router, remote monitoring, remote video, Industrial control DIY and 

so on. 

 

The module based on the single chip AR9331 which integrates an 802.11n 1x1 MAC/BB/radio with 

internal PA and LNA. It supports 802.11n operations up to 72 Mbps for 20 MHz and 150 Mbps for 40 MHz 

channel respectively, and IEEE 802.11b/g data rates. 

Characteristics: 

CPU: AR9331 400Mhz MIPS core 

RAM: 64M DDR2 RAM 

Flash: 16M SPI NOR Flash memory(4/8m option) 

Wireless speed: up to 150Mbps 

General GPIO: 20 (not including TX, RX) 

High-speed UART for console support   

USB: Usb 2.0 master interface, support USB hub extension 

Power supply voltage: 3.3V. 

Port: 2×100Mbps network interface 

Antenna: the built-in PCB /IPX external antenna. 

Debug: serial debugging interface has been out. 

Board Power: 0.36W 

Product size: 27.6 * 52.8MM 

SPI interface pin out.