Shenzhen Fostar Electronic Co. Ltd FC2501PA ユーザーズマニュアル

13

Users who have static IP addresses do not need to set DDNS service settings for remote access. When you 
have finished connecting the camera using the LAN IP address and port forwarding, you can access the 
camera directly from the Internet using the WAN IP address and port number.   

To obtain your WAN IP address, enter the following URL in your browser: 

http://www.whatismyip.com

.The 

webpage at this address will show you the current WAN IP. 

Figure 2.3 

Access your IP Camera from the Internet 

You can access the IP Camera from the Internet (remote access). Enter the WAN IP address and port number 
in your standard browser. For example, you would enter http:// 183.37.28.254:85

NOTES:
Make sure port forwarding is successful. You can do port forwarding two ways.   

1) Login to your router to enable the “UPNP” function. You can then login to the camera as administrator, 

choose Network, and then choose UPnP to enable UPnP. Make sure that the status of UPnP reads “UPnP 

Successful” on the Device Status page. 

2) Do port (HTTP port and Media port) forwarding manually.   

If your router has a Virtual Server, it can do port forwarding. Add the camera’s LAN IP and port which you had 

set earlier to your router’s port forwarding settings.   

If you plug the camera into a router, it will have a dynamic IP address and you need to set DDNS service 
settings to view it remotely.