Shenzhen Fostar Electronic Co. Ltd FC2501PA ユーザーズマニュアル

37

If you want to view multi-surveillance screens on one window, you need to login one camera, and set it as the 

main device, and do Multi-Device Settings, add other cameras to the first one camera. Before you do 

multi-cams settings, you need to assign different port such as 81, 82, 83, 84, 85, 86, 87, 88 to the cameras if 

there is 8 cams installed.   

The firmware within the camera can support a maximum of 9 devices monitoring all at the same time. This 

page you can both add MJPEG and H.264 series cameras to the first camera and view multi-surveillance 

screen on one window. 

In Multi-Device Settings page, you can see all devices searched in LAN. The 1st Device is the default one. You 

can add more cameras in the list in LAN for monitoring. The camera’s software supports up to 9 IP Cameras 

online simultaneously. Click The 2nd Device and click the item in the Device List in LAN, the Alias, Host and 

Http Port will be filled in the boxes below automatically. Enter the correct username and password then click 

Add. Add more cameras in the same way.   

Figure 4.11

Camera Model: Our Company produces two series cameras: MJPEG and H.264. Here will show you which 

series the camera belongs to.