Shenzhen Fostar Electronic Co. Ltd FC2501PA ユーザーズマニュアル

78

Figure 4.72

Figure 4.73

CAUTION: If your camera works well with the current firmware, we recommend not upgrading. Please don’t 

upgrade the firmware unnecessarily. Your camera may be damaged if misconfigured during an upgrade.   

1)  Before upgrade the firmware, please unplug the SD card and reboot the camera, don’t upgrade the 

firmware in WAN through the web UI, or else the upgrade process may be failed.   

2)  Please ensure you have download the correct firmware package for your camera before upgrading. Read 

the upgrade documentation (readme.txt file) in the upgrade package before you upgrade. 

3)  Upon downloading the firmware check the sizes of the .bin files. They must match the size in the 

readme.txt file. If not, please download the firmware again until the sizes are the same. Your camera will 

not function correctly if a corrupt .bin file is used. 

4)  Normally, only Device WEB UI need to be upgrade, please do not try to upgrade the Device System 

Firmware. 

5)    Never shut down the power of the camera during upgrade until the IP camera restart and get connected. 

6)    After upgrade successfully, please uninstall the old plugin and re-install it, then reset the camera to the