Intel Corporation ND1 ユーザーズマニュアル
Connecting to the Intel® Edison Board
Intel® Edison
Quick Start Guide
Quick Start Guide
September 2014
22
Intel Confidential
Document Number: EQSG-ww29
6.3
Changing an Edison board’s static IP address
If you more than one Intel® Edison device, you will need to change the static IP address of each additional board in
the same host via SSH. To change an Edison’s IP address, do the following:
the same host via SSH. To change an Edison’s IP address, do the following:
1. Log on to the Edison board via SSH.
2. Edit the /lib/systemd/system/network-gadget-init.service file and change the default IP address listed in
2. Edit the /lib/systemd/system/network-gadget-init.service file and change the default IP address listed in
following two lines:
ExecStart=-/bin/sh –c “ ifconfig usb0 192.168.2.15”
ExecReload=-/bin/sh –c “ ifconfig usb0 192.168.2.15”
ExecReload=-/bin/sh –c “ ifconfig usb0 192.168.2.15”
3. Next time you og on to this Edison device via SSH, the static IP address will be changed.
§