Raspberry Pi Trading Ltd RPI32 ユーザーズマニュアル

ページ / 2
Raspberry Pi 
Regulatory Compliance and Safety 
Information 
Product Name: Raspberry Pi 3, Model B Uncased Version 
 
IMPORTANT 
PLEASE RETAIN THIS INFORMATION FOR FUTURE REFERENCE 
 
Warnings 
This product shall only be connected to an external power supply rated at 5V dc, and a maximum current of 1500 
– 2000 mA. 
Any external power supply used with the Raspberry-Pi shall comply with relevant regulations and standards applicable in the 
country of intended use. 
This product should not be overclocked as this may make certain components very hot. 
This product should be operated in a well ventilated environment and should not be covered. 
This product should be placed on a stable, flat, non-conductive surface in use and should not be contacted by conductive 
items. 
 
Instructions for safe use 
To avoid malfunction or damage to your Raspberry Pi please observe the following: 
Do not expose it to water, moisture or place on a conductive surface whilst in operation. 
Do not expose it to heat from any source; the Raspberry Pi is designed for reliable operation at normal ambient room 
temperatures. 
Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors. 
Avoid handling the Raspberry Pi while it is powered. Only handle by the edges to minimize the risk of electrostatic discharge 
damage. 
All peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked 
accordingly to ensure that safety and performance requirements are met. 
These articles include but are not limited to keyboards, monitors and mice used in conjunction with the Raspberry Pi. 
 
Compliance Information 
The Raspberry Pi complies with the relevant provisions of the RoHS Directive for the European Union. 
 
WEEE Directive Statement for the European Union 
In common with all Electronic and Electrical products the Raspberry Pi should not be disposed of in household waste. 
Alternative arrangements may apply in other jurisdictions. 
 
CMIIT ID: XXXXXXXXXX 
 
 
EMC Compliance Statements 
European Union (EU) Electromagnetic Compatibility Directive Compliance 
Statement 
This product is in conformity with the protection requirements of EU Council Directive 2004/108/EC on the approximation of the 
laws of the Member States relating to electromagnetic compatibility. 
This product has been tested and found to comply with the limits for Class B Information Technology 
Equipment according to the European Standard EN 55022. 
Warning: This is an EN 55022 Class B product. In a domestic environment this product may cause radio interference 
in which case the user may be required to take adequate measures. 
 
Federal Communications Commission (FCC) Emissions Compliance Statement 
This equipment has been tested and complies with the limits for a Class B digital device, pursuant to Part 
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the 
equipment is operated in a commercial environment. 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device might 
not cause harmful interference, and (2) this device must accept any interference received, including interference that might 
cause undesired operation.  
Warning: Operation of this equipment in a residential area is likely to cause harmful interference, in which case the 
user will be required to correct the interference at their own expense.
 
 
 
 
 
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
 
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment
·       This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference,
and
(2) This device must accept any interference
received, including interference that may cause undesired operation.
 
This device complies with Part 15 of the FCC Rules.  Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any
other antenna or transmitter.
 
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment
 
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference, and 
(2) This device must accept any interference received, including interference that may cause undesired operation. 
 
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the
specific operating instructions for satisfying RF exposure compliance. This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
 
Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate
the equipment
This product should not be used within 20cm of the body with the Wi-Fi/Bluetooth switched on.