Qingdao Yeelink Information Technology Co. Ltd. MJCTD01YL ユーザーズマニュアル
1. Suitability for use "indoors", the related ambient temperature is 25℃.
2. Use the power resource correctly in the door.
3. Cut off the power before opening cover or replacing the bulb.
4. If in any doubt, consult a qualified electrician.
5. Do not put the luminaire on the inclined plane.
6.
For household use only.
7.
Class Ⅱ luminaire.
8.
Do not dispose of electrical appliances as unsorted municipal waste, use separate
collection facilities. Contact your local government for information regarding the collection
systems vailable. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health
and well-being.
systems vailable. If electrical appliances are disposed of in landfills or dumps, hazardous
substances can leak into the groundwater and get into the food chain, damaging your health
and well-being.
9. If the power cord is damaged, it must be replaced by the manufacturer or a qualified service
engineer to avoid any risks to safety.
10. The LED module can not be replaced.
11. Do not disassemble the product. The light-emitting diode may cause damage to your eyes.
Warning
*Make sure that the Wi-Fi network is available and is able to
access the Internet properly.
Specifications
Life expectancy: 25,000h
Off-delay timer
Mi Bedside Lamp
User Manual
115mm(±0.5)
460mm(±0.5)
115mm(±0.5)
115mm(±0.5)
460mm(±0.5)
115mm(±0.5)
Thank you for choosing Mi Bedside Lamp. High-quality LED lights and professional optical
structure combined with the natural light mixing algorithm make Mi Bedside Lamp a perfect
companion to your bedside table.
structure combined with the natural light mixing algorithm make Mi Bedside Lamp a perfect
companion to your bedside table.
* Place the lamp on a bedside table.
Read this manual carefully before using the product
Online support: www.mi.com/service
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem Company)
Address: 10F-B4, Building B, International Innovation Park, 1 Keyuan Weiyi Road, Laoshan,
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem Company)
Address: 10F-B4, Building B, International Innovation Park, 1 Keyuan Weiyi Road, Laoshan,
Qingdao, Shandong Province, China
Power adapter
Power supply
Adapter plug
Unpack the lamp and connect the power cord.
Press to turn on/off
Power button
Preset button
Press to switch between
color presets
color presets
1. Scan the QR code below or go to App store to download and install Mi Home app.
2. Turn on the lamp, open the app, and follow instructions.
2. Turn on the lamp, open the app, and follow instructions.
Controls
Slide along the edge to
adjust brightness
adjust brightness
Preset button
Scene button
Scene button
Power button
Power button
Hold the power button until the light starts
breathing, then release.
breathing, then release.
Delayed power off
Adjusting colors
Factory reset
* The lamp will switch off in 15 minutes by default.
You can adjust the delay in the Mi Home app.
* This action does not change the color presets.
Slide along the edge while holding the
preset button to adjust colors.
preset button to adjust colors.
Press and hold the power button and the preset button simultaneously for 5 seconds. The
light will turn red, green, and blue; and the lamp will reboot after that.
light will turn red, green, and blue; and the lamp will reboot after that.
Advanced features
* Perform the factory reset and connect the lamp
again every time you use a new Wi-Fi network.
Features
16M colors
Adjustable brightness
Timer
Presets
Touch controls
Adjustable
color temperature
Night light
Control via app
Firmware updates
Eye care
Adjustable colors
Color temperature range: 1700-6500K
Luminous flux: 300 lumens
Color range: 16 million colors
Model: MJCTD01YL
Controls: touch, software
Frequency bands: 2402—2480MHz
Connectivity: Wi-Fi IEEE 802.11 b/g/n 2.4GHz, Bluetooth 4.2 BLE
System requirements: Android 4.4 or iOS 8.0 or later versions
Rated power: 10W (14×0.7W/LED module)
Rated input: 220―240V~ 50/60Hz 0.5A
Rated lamp input: 12V 1A
Power factor: 0.5
Maximum output power: 10W
Mi Bedside Lamp User Manual
Mi Bedside Lamp User Manual
Read this manual carefully before using the product
Online support: www.mi.com/service
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem Company)
Address: 10F-B4, Building B, International Innovation Park, 1 Keyuan Weiyi Road, Laoshan,
Manufacturer: Qingdao Yeelink Information Technology Co., Ltd. (a Mi Ecosystem Company)
Address: 10F-B4, Building B, International Innovation Park, 1 Keyuan Weiyi Road, Laoshan,
Qingdao, Shandong Province, China
Instructions
Install Mi Home App
Any changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
(1) Reorient or relocate the receiving antenna.
(2) Increase the separation between the equipment and receiver.
(3) Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
(4) Consult the dealer or an experienced radio/TV technician for help.
FCC Compliance Statement
To maintain compliance with FCC's RF exposure guidelines, this equipment should be
installed and operated with a minimum distance of 20cm between the radiator and your body.
installed and operated with a minimum distance of 20cm between the radiator and your body.
Folding way:
After folding:
Front page:
Back page: