ZOLL Medical I Ltd. UCOR30 ユーザーズマニュアル

ページ / 29
 
µCor 3.0 Monitoring System 
Instructions for Use
 
 
 
  
                    
Page 10 of 29 
 
 
 
Figure 1:  Data transmission of the µCor 3.0 System 
 
4.4
  PATCH  
The Patch (as shown in Figure 2) consists of a plastic frame 
intended for housing the Sensor, and two ECG electrodes 
on each side of the frame.  It is applied to your body. 
The Patch is a single-use disposable item.  As described in 
the General Warnings and Precaution Section, it should not 
be worn for more than 5 days.  At the end of 5 days, it 
should be replaced with a new Patch.    
 
4.5
  SENSOR 
The Sensor (as shown in Figure 3) is a battery powered unit that acquires your 
measurements.  The Sensor connects to the Patch via the snap-in clip and positioning 
tabs.  Through the adhesive backing on the Patch, the device becomes wearable. 
 
The Sensor is not disposable and needs to be returned to ZOLL upon the completion of 
the prescription. 
As shown in Figure 3, a light indicator is located close to the center and serves to 
communicate the Sensor’s status at different points of use.  Please note that the 
technician button as illustrated in Figure 3 is for ZOLL use only. 
Figure 2:  Patch