Digital China Networks Limited DCWL7942AP50 Test Setup Photos

 

Please check the following items before the AP installation: 
  Please power to the AP first and connect the AP to the Ethernet, then check the 

LED status to make sure the AP can work normally.   

  Please ensure to complete the wiring in the position of AP installation. 
  7900AP series  indoor  AP  supports  802.3af  and  802.3at  standard PoE (Power 

over Ethernet) power. If user wants to get the maximum performance, user can 

use the 1000M connection method. 

  Please record AP’s MAC address and serial number (MAC address and serial 

number are on the back of the AP) first for convenient to find and use. 

 

The rules of installation position are as below: 
  Cut back the obstacles (such as walls) between AP and the user terminal device 

as much as possible. 

  Make the AP’s position far away from the electrical device that can bring the RF 

noise (such as the microwave). 

  The installation position should be hidden as much as possible to prevent 

disturbing the inhabitants. 

  Strictly forbid to install the AP in the environment with hydrocephalus, seepage, 

water-clock and condensation. And user should avoid the water flowing into the 

device along the cable. 

 

 

If there is outdoor cable, please check if installed the network port SPD beside the AP, 

the network port SPD should be provided by user. 

 

The installation methods of 7942AP(R5)  and  7962AP(R5)  are the same. The 

following example will introduce the installation method with 7962AP(R5). 

 

7900AP series can be installed indoor only and there are two methods supported: 
  Wall hanging installation 
  T-keel installation