Innokas Yhtyma Oy VC150 ユーザーズマニュアル
8-2
VC150 Vital Signs Monitor
KO00065K
Masimo SpO
2
: Description
Description
The SpO
2
parameter in the monitor is available in three different technologies:
•
GE TruSignal
•
Nellcor OxiMax
TM
•
Masimo rainbow
®
SET
®
The SpO
2
technology logo on the left side of the monitor, above the physical
connector, will disclose which technology the monitor is equipped with. If you
want to use a different SpO
want to use a different SpO
2
technology than your monitor is currently equipped
with, contact service to discuss the procedure. Use of Masimo rainbow
®
SET
®
parameters or Masimo RRa requires licenses that can be purchased separately
and may need specific accessories.
and may need specific accessories.
The SpO
2
function is calibrated to read functional arterial oxygen saturation.
When a suitable SpO
2
sensor is connected to the monitor and to the patient, the
measurement values will be shown on the screen. Pulse rate derived from SpO
2
appears in the PR (Pulse Rate) window and updates continuously. The primary
source of pulse rate is always SpO
source of pulse rate is always SpO
2
, i.e., if SpO
2
is measuring when an NIBP
determination is completed, the pulse rate derived from NIBP is not displayed. A
tone sounds at a rate corresponding to the pulse rate and at a pitch
corresponding to the SpO
tone sounds at a rate corresponding to the pulse rate and at a pitch
corresponding to the SpO
2
saturation level. The pitch is highest at 100% oxygen
saturation, and it continuously decreases as the saturation level falls.
CAUTION
The pulse rate derived from SpO
2
is a value calculated from oxygen
levels. The pulse rate is not equal to the patient’s actual heart rate.
Audible and visual alarms occur when SpO
2
levels are outside the alarm limits.
and the monitor is in monitoring mode. When a parameter status alarm occurs,
an alarm message appears at the top of the screen (rectangle in the image
above).
an alarm message appears at the top of the screen (rectangle in the image
above).