Walkingspree USA Ltd. WALKINGSPREE ユーザーズマニュアル

Your Wireless Activity Tracker 
Box includes:

- Inspire Activity Tracker
- USB cable
- USB Dongle
- Wristband
- Belt clip 
- Lanyard
- User manual

Specifications

 

  

Getting Started

JP1301

To save battery life, your Inspire 
Activity Tracker arrives in 
hibernation mode. Press and hold 
down the button to activate the 
Inspire. The progress bar will 
change from empty to full to 
indicate full activation as below. 
Your Inspire will not arrive fully 
charged.

Product Name: Inspire
Size: 
Height: 1.8 inches (46 mm)
Width: 0.90 inches (23 mm)
Depth: 0.39 inches (10 mm)
Weight: 0.317 oz (9 g)
Battery: rechargeable lithium polymer battery 
(65mAh)
Data Memory: 15 days

Support: http://support.walkingspree.com

Phone: 1-877-789-9255, select 1 for Support

 How to wear the Inspire

The Inspire can be worn:
1. on it’s own
2. in  clip with lanyard
3. on the wrist using the wristband.

You might have to try different locations to 
see what works the best for you in terms of 
accuracy.

The Inspire is water resistant, but not 
waterproof. Do not wear your Inspire 
during activities when it might get wet.

-A full battery will last a minimum of 3 
days, but will typically last 5-7 days.

To charge the battery, plug the Inspire 
into the PC Computer via the USB cable. 
The indicator will show the charge level.

Note: Even if the Tracker is not in use, 
please charge the battery at least once a 
month to prolong battery life.

Battery charge

-When the battery power is low, the 10%  
battery mark will show to remind you to 
charge your battery.
-It takes about one to two hours to 
recharge an empty battery. You can 
charge more frequently for shorter time 
periods to provide enough battery life until 
you can do a longer charge (this may 
shorten battery life).

Time/Date/Battery

Steps

Calories Burned

Distance

Minutes of Activity

% Personal Goal

% Program Goal 

 

Inspire Wireless Activity Tracker

Display Modes on Your Inspire 
Activity Tracker. To rotate through
screens, press the top button.

This device complies with Part 15 of the FCC Rules. Operation is subject to 

the following two conditions:

(1)this device may not cause harmful interference, and 

(2)this device must accept any interference received, including interference 

that may cause undesired operation.

NOTE : This equipment has been tested and found to comply with the limits 

for a Class B digital device, pursuant to Part 15 of the FCC Rules. These 

limits are designed to provide reasonable protection against harmful 

interference in a residential installation. This equipment generates, uses 

and can radiate radio frequency energy and, if not installed and used in 

accordance with the instructions, may cause harmful interference to radio 

communications. However, there is no guarantee that interference will not 

occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by 

turning the equipment off and on, the user is encouraged to try to correct 

the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to 

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

CAUTION: Changes or modifications not expressly approved by the party 

responsible for compliance could void the user’s authority to operate the 

equipment.

Be sure to use the lanyard when using the 
belt clip to prevent loss. Loop the string 
through the belt clip a couple of times. 
Attach the other end to your clothing.

After plugging in your Tracker, a 
menu screen will appear on your PC,
select the “Register Tracker”option. 
Enter your current Walkingspree 
Username and password. 

Install the PC software at:
www.walkingspree.com/setup
Plug one end of your USB cable in to 
the Inspire and the other end into
an available USB port on your PC
computer. 

Insert the bluetooth wireless dongle
into any available USB port. Your
Inspire should automatically pair
to your bluetooth dongle when you 
are within 20 feet of the dongle.

Upon receiving“Device Successfully 
Registered” message, unplug the 
Inspire from the USB port. During 
registration the time on your tracker 
will be synced to your local time.

iPhone App Setup: 
www.walkingspree.com/mobile

CLEANING THE UNIT
- 

To prevent fire or shock hazard, disconnect your unit 

from the USB port of power source when cleaning.
- 

The finish on the unit may be cleaned with a dust cloth 

and cared for as other furniture, Use caution when 
cleaning and wiping the plastic parts.
- 

If the cabinet becomes dusty, wipe it with a soft dry dust 

cloth. Do not use any wax or polish sprays on the device.
- 

If the front panel becomes dirty or smudged with 

fingerprints it may be cleaned with a soft cloth slightly 
dampened with a mild soap and water solution. Never 
use abrasive cloths or polishes as these will damage the 
finish of your unit.
 CAUTION: Never allow any water or other liquids to get 
inside the unit while cleaning. 

- 

Do not burn or bury batteries. 

- 

Do not puncture or crush. 

- 

Do not disassemble.

- 

Recycle Li-Polymer batteries. Do not dispose of in the 

trash.
- 

Use only chargers rated for Li-Polymer cells. Be sure the 

charger’s voltage and current settings are correct for the 
battery pack being charged.
- 

Charge batteries on a fireproof surface away from 

flammable items or liquids.
- 

Batteries should NEVER be left unattended while 

charging. Only adults should charge the batteries.
- 

Follow instructions for charging the product and do not 

charge longer than recommended. Unplug the charger 
when the battery is charged or not in use.

Bluetooth® is a registered trademark of 

Bluetooth SIG, Inc

Printed in China.