The Watt Stopper Inc. d/b/a Qmotion 150404Z ユーザーズマニュアル

Step 1

Open the coordinator hub for joining or pairing the

remote and the shade.

- If you already have a coordinator/

router check manufacturers instruction on

how to place into pairing mode

- If using QMotion Router push

pairing button on side and let go

Step 2

Slightly tug the shade 6” to wake shade up. The

shade will try to join the network by moving up and

down (jogging). Will be in learn mode for 2 minutes.

Step 3

Press any button on the remote to join the network.

Step 4

Shade is now connected to network. LED on

remote will flash letting you know if connected.

Step 5

Learn shade to remote. Hit “MODE SELECT”

button on the back of remote. Then you will hit “UP”

button. Shade will then move to 75% position.

Step 6

Tug the shade 6” and let go. Shade is now learned

to the remote.

Step 7

To learn bottom limit, hold “DOWN” button for five

seconds. Shade will jog.

Step 8

Tug shade to enter learn mode.

Step 9

Pull shade to desired bottom limit.

Step 10

Hold “DOWN” button for five seconds to store posi-

tion. Shade will jog to confirm learned bottom limit.

Step 11

Hit “DOWN” button to confirm bottom limit.

Step 12

Hit “UP” button to open shade. Shade will travel to

full open position. You now have bottom limit and

intermediate positions learned.

NETWORK SETUP AND

INSTALLATION INSTRUCTIONS

UNIVERSAL REMOTE (MODEL #QZR-ZIG2400),

CRYSTAL CONNECT (MODEL #QMRS-240Z),

& QMotion Router (MODEL # 150404Z)

Channel Button

Variable
Position

Butttons

Channel/Mode

Reverse Side

Mode Select Button

Pairing the remote

to the QMotion

Router allows for
communications

to your shades

Universal

Remote

QMotion Router

Crystal Connect

Roller Shade

Up/Down

Buttons

IMPORTANT

Read and understand all instructions before installing.

Always wear personal protection equipment including

safety glasses and gloves. Use a ladder per its

manufacturer’s instructions. Work safely!