Laufer Wind Group LLC ADS-1001 ユーザーズマニュアル
19
Laufer Wind - 10 Commerce Park North, Suite 12, Bedford, NH 03110 USA - Sales and Service: (212)792-3912
The Signal Viewer’s signal graph will initially be a flat line. Later, when the magnetron
high voltage is turned on, the signal should appear similar to that shown in Figure 13.
NOTE: The Signal Viewer is only provided as a test diagnostic and is not run during the
normal operation of the Radar. Running the Signal Viewer uses significant processor
resources, resulting in increased power dissipation and thermal load within the Radar.
Therefore the Signal Viewer should only be used for short periods to confirm
Radar operation and never be left running longer than necessary.
high voltage is turned on, the signal should appear similar to that shown in Figure 13.
NOTE: The Signal Viewer is only provided as a test diagnostic and is not run during the
normal operation of the Radar. Running the Signal Viewer uses significant processor
resources, resulting in increased power dissipation and thermal load within the Radar.
Therefore the Signal Viewer should only be used for short periods to confirm
Radar operation and never be left running longer than necessary.
Figure 13. Screenshot of the Signal Viewer GUI displaying Radar microwave pulse
waveforms.
waveforms.
----------------------------------------------------------END --------------------------------------------------------