RuggON Corporation PM-521 ユーザーズマニュアル

22

 

Getting Started

 

 

 

 

3.  Press the microSD card in and release it. The card springs out.

 

 

4.  Grasp the microSD card and remove it from the slot.

 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

 

5.  Close the left I/O compartment cover. See “Closing the I/O Compartment Cover” on page

 

26.

 

 

Using the Stylus

 

 

Following the information below when using a stylus:

 

„ 

Use only the included stylus to touch the screen. Do not place any objects on its surface and

 

do not press down strongly with sharp-pointed or hard objects that may leave marks (e.g., 
nails, pencils and ball point pens).

 

„ 

Use the stylus only for touching the screen. Using it for any other purpose may damage the

 

stylus and result in scratches on the screen.

 

„ 

The pointer cannot follow the stylus movement if you move the stylus too quickly.

 

 

To make a selection, tap the screen once with the stylus. To double-click, tap twice without 
pausing. To do a right-click, tap the screen once and hold the tip of the stylus on the screen, the 
right-click icon appears.

 

 

Removing the Protective Film from the Display

 

 

The front display of the PM-521 is protected during transport by a transparent film. This film should 
remain on the front display during assembly to avoid damage to the front display surface.

 

 

Only remove the film once all of the assembly work has been completed.

 

 

 
 

fn

 

f1 

f2

 

 

fn