P12 Enterprises/ Allen Bogdanoff E4405B ユーザーズマニュアル

V. Programming (code clearing and code matching)

Code matching:

For a new kit (remote& controller), the remote can work only when it is programmed to the
controller.

Please follow the below instructions:

Correctly connect between power supply, LED controller and LED load.

Switch off the power, then switch on again, and press key 5 once (within 3 seconds)

the moment you see the light is on. The LED light blinks twice slowly when it is done.

Code clearing :

The code can be cleared as needed.

The kit (remote and controller) will stay in the original state after code clearing.

It can work when code matching is done.

Please follow the below instructions:

Correctly connect between power supply, LED controller and LED load.

Switch off the power, then switch on again, and long press key 5(within 3 seconds)

the moment you see the light is on. The LED light blinks nine times swiftly when it is done.

Attention:

1. The regular product for sale is a kit (remote and controller).

The user can re-programme freely as needed. One remote can control countless controllers, but

one controller can only be control LED by four remotes (Max).

2. Please check the battery installation and controller (totally discharge the power), when you

programme after switching off and switching on.