UWIN INNOVATION LIMITED SP6020 ユーザーズマニュアル
4
1.4 Charge Mobile Phone
The joint is connected to the mobile phone charger, mobile phone battery
indicator
on the screen will flash cycle; charging if it is turned off, charging
indicator will appear on the screen of the screen, the battery charging. If the phone is
still excessive use when battery is low, probably over a period of time after charging
indicates a symbol will appear on the screen charge. When the
on-screen
battery
indicator shows
full,
and
no longer
flashing
,
indicating that charging
has been
completed.
After charging is complete,
disconnect the AC
power outlet
which
connect
the phone and
charger.
If you do not have the charger with the power and the phone is disconnected,
then after a fairly long period of time (about 5 to 8 hours), the battery consumption to
a certain extent, the phone starts charging again. We recommend that you do not do
so, because it will your battery performance and life of some impact.
1.5 Charger Precautions
Please use 220V AC. Using other voltage can cause leakage, fire or
damage to the phone and charger. Prohibit short-circuit charger, otherwise it will
cause electric shock, smoke and damage to the charger. Please do not use the
charger in the case of the power cord damage, otherwise it will lead to a fire and
electric shock.
Please clean the dust on the power socket.
Please do not put water container near the charger, to avoid overheating,
leakage and malfunction caused by water spills. If the charger come into contact with
water or other liquids, immediately unplug the power from the outlet down to prevent
overheating, fire, electric shock and malfunction of the charger.
Do not disassemble or modify the charger, otherwise it will lead to personal
injury, electric shock, fire and damage to the charger.